$273.00
SE
IPRE SR600 anchor pattern instrument shot peening sand blasting Roughness Gauge 0~2000a large range
Surface Profiles and Pits
The measurement unit can be interchanged between male/imperial, suitable for surface contour and pit measurement, accuracy +/- 2um, range 0~2000um (maximum adjustable to 6500um).
$742.00
SE
LANDTEK SRT-6200S Roughness Gauge External Sensors Simultaneous measurement of Ra/Rz/Rq/Rt values
Ra、Rz、Rq、RtRa，Rq ：0.05~10.00μm/1.000~400.0uinch；Rz，Rt ：0.020~100.0μm/0.780~4000uinch
Inductance type; measurement Ra, Rz, Rq, Rt values, external high-precision Sensors, accuracy ≤ +/- 10%; stylus 10 μm; with RS232 interface, can store 7 sets of data.
$871.00
SE
Defelsko positector SPG1 Roughometer
0~500μm(0~20mils)
Dedicated to sand blasting steel measurement, range 0~500μm; aluminum oxide wear-resistant surface and tungsten carbide stylus tip; built-in temperature compensation function to ensure accuracy; equipment calibration certificate can be traced back to PTB.
$1509.00
SE
Defelsko SPGS3 Roughometer positector SPG S Advanced
0~500μm(0~20mils)
Dedicated to sand blasting steel measurement, Measurement range 0~500μm; Can store 10000 measurement readings; Adopt aluminum oxide wear-resistant surface and tungsten carbide tip; Built-in temperature compensation function to ensure accuracy; Calibration certificate can be traced back to PTB.
$954.00
SE
IPRE SR500 Roughometer OLED Digital Display
Ra:0.025-12.5μm
Using ARM for control and data processing, fast, low power consumption, rich display information, intuitive, can display all parameters and graphics.
$1019.00
SE
Defelsko SPG CS1 surface roughness meter for Coating asperity measurement
0~1500μm(0~60mils)
$1361.00
SE
Defelsko SPG3-E advanced surface roughness meter, image Linear dispersion 500 μm range
0~500μm(0~20mils)
$1509.00
SE
Defelsko SPGCS3 Advanced Surface Profile Roughness Gauge Texture Coating
0~1500μm(0~60mils)
$972.00
SE
LEEB432 Surface Roughness Tester multiparameter measurement Measurement range 160μm
160μm
Multiparameter measurement, OLED dot matrix display, mechatronics design, using DSP chip for control and data processing, can store 100 sets of original data sources, compatible with multiple national standards.
Login
PRSR110 Roughness Gauge 4 measurement parameters Ra/Rz/Rt/Rq
Ra、Rz、Rt、RqRa、 Rq：0.05~10.0;Rz、 Rt：0.1~50
$590.00
SE
LANDTEK SRT-6100 Surface Roughometer 10μm stylus measurement Ra and Rz values
Ra、RzRa: 0.05 ~ 10.00μmRz: 0.1 ~ 50.0μm
Inductance type; measurement of Ra and Rz values, accuracy ≤ +/- 15%; built-in Sensors; stylus 10μm; conforms to GB/T6062 standard; with RS232 interface.
Login
High-precision Roughness Gauge KAIRDA NDT150 surface roughness testing instrument
Ra、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrZ axis (vertical): 160μm; X axis (horizontal): 17.5mm
Login
PRSR210 Digital Roughness Gauge supports 13 measurement parameters
Output: 0.025 ~ 12.5μmRa、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr
$957.00
SE
LANDTEK SRT-6210 Surface Roughometer Needle Radius 5μm measurement Ra/Rz/Rq/Rt value
Ra，Rq ：0.05~16.00μm/0.020~629.9uinch；Rz，Rt ：0.020~160.0μm/0.078~6299uinchRa、Rz、Rq、Rt
Needle tracing method; measurement Ra, Rz, Rq, Rt values, built-in Sensors, accuracy ≤ +/- 10%; large-capacity lithium-ion rechargeable battery; stylus 5μm; with RS232 interface, can store 7 sets of data.
$462.00
SE
LANDTEK SRT-6223 sand blasting shot peening Roughness Gauge printing, lame plating
0 ~ 800µm
Dedicated to sand blasting shot peening, printing, lame plating anti-corrosion test; integrated structure; range 0~800μm; accuracy +/- 5%; with RS232 interface; can be purchased separately USB and Bluetooth data output.
Login
KAIRDA NDT160 Roughness Gauge split surface roughness Tester
Ra,Rz,Rq,Rt，Rp,Rv,R3z,R3y,Rz(JIS),Rs,Rsk,Rsm,Rku,Rmr; Ry(JIS);Rmax，RPc，Rk，Rpk，Rvk，Mr1，Mr2Z-axis (vertical): ± 80μm/± 160µm (enhanced); X-axis (horizontal): 20mm
$957.00
SE
LANDTEK SRT-6210S Roughness Gauge 5μm Radius Needle Data storage function
Ra、Rz、Rq、RtRa，Rq ：0.05~16.00μm/0.020~629.9uinch；Rz，Rt ：0.020~160.0μm/0.078~6299uinch
Needle tracing method; measurement of Ra, Rz, Rq, Rt values, external high-precision Sensors, accuracy ≤ +/- 10%; stylus 5μm; with RS232 interface, can store 7 sets of data.
Login
PRSR200 Roughness Gauge supports 16 measurement parameters
Ra、Rq(0.005~16μm)；Rz、Ry、Rt、Rp、Rv、Rmax、R3z、Rz(JIS)(0.02~160μm)；RS、RSm(1mm)；Rmr、Rsk(0~100%)Ra ， Rz ， Rq ， Rt ， Rp ， Rv ， R3z ， R3y ， RzJIS ， Rsk ， Rku ， Rsm ， Rmr
$742.00
SE
LANDTEK SRT-6200 Roughness Gauge 10μm stylus with built-in high-precision Sensors
Ra: 0.05 ~ 10.00μm / 1.000 ~ 400.0uinchRz: 0.020 ~ 100.0μm / 0.780 ~ 4000uinchRa、Rz
Inductance; measurement of Ra and Rz values, built-in high-precision Sensors, accuracy ≤ +/- 10%; stylus 10 μm; with RS232 interface.
$972.00
SE
Surface roughness meter AMITTARI AR-132A high-precision Sensors surface roughness meter
Ra，Rq：0.05~10.00μm/1.000~400.0uinch；Rz，Rt：0.020~100.0μm/0.780~4000uinchRa、Rq、Rz、Rt
High cost performance; support Ra. Rz. Rq. Rt multi-parameter measurement, 10 micron measurement radius; high-precision Sensors, LCD digital display, support USB/Bluetooth data connection output.
Login
Surface Finish Meter KAIRDA NDT120 Surface Finish Meter is suitable for a variety of surface finish inspections
Ra、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrRa: 0.005µm ~ 16.00µm
$1314.00
SE
LEEB462 surface roughness multiparameter measurement supports bluetooth printing and mobile app
Support Bluetooth printing and mobile app operation, simple button and touch screen dual operation, support lateral, upward and other direction measurement, multiparameter measurement, large-capacity Data storage.
$778.00
SE
Surface roughness instrument AMITTARI AR-132C Portable precision Surface Roughness Tester
Ra、RzRa:0.05~10.00μm/1.000~400.0uinch;Rz:0.020~100.0μm/0.780~4000uinch
$1052.00
SE
Surface roughness instrument AMITTARI AR-132B digital Surface Roughness Tester
Ra，Rq：0.005~16.00μm/0.020~629.9uinch；Rz，Rt：0.020~160.0μm/0.078~6299uinchRa、Rq、Rz、Rt
$901.00
SE
TQC SP1560 Digital display Surface Roughness Tester Coating thickness Measurement Instrument 2-in-1
3.4mm
Equipped with two different probes, Surface Roughness Tester + Coating thickness measurement
Login
Surface roughness Tester KAIRDA NDT110 Metal and Non-metallic parts surface roughness testing instrument
Ra、 Rq: 0.05μm ~ 15μm RzRt: 0.1μm ~ 50μmRa、Rz、Rq、Rt
If you don't know how to choose "Roughometer", please consult customer service.