Germany HTechMT SP310-C rubbing paper Measurement range 20~64μm
Germany HTechMT SP310-C rubbing paper Measurement range 20~64μm, SP310-C rubbing paper is the rubbing paper into the measured surface, and fully imprinted, the surface roughness will be recorded in detail on the rubbing paper.
HTechMT
-
PRSR110 Roughness Gauge 4 measurement parameters Ra/Rz/Rt/Rq
Login -
Sand blasting shot peening Roughness Gauge AMITTARI AR-131A shot peening sand blasting, printing anti-corrosion and other industry tests
$ 431.00 -
KAIRDA NDT151P Roughness Gauge
$ 823.00 -
ZKP Ipre SR131 Deep Slot Sensors
$ 463.00 -
KAIRDA NDT151 Roughness Gauge asperity Measurement Instrument
$ 698.00
Introduction
SP310 rubbing paper (anchor paper) provides a simple way to measure surface roughness. Rubbing paper consists of a layer of hard, incompressible polymer and a layer of foam. After the rubbing paper is placed on the surface to be measured and fully imprinted, the surface roughness is recorded in detail on the rubbing paper.
Parameters
| Model | Measuring range ( mils / μm ) |
| SP310-CM | 0.5 - 1.0 / 12 -25 |
| SP310-C | 0.8 - 2.5 / 20 - 64 |
| SP310-XC | 1.5 - 4.5 / 38 - 115 |
| SP310-XP | 4.6 - 5.0 / 116 - 127 |
HTechMT SP310-C rubbing paperSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0.5~1.0mils/12~25μm |
HTechMT SP310-C rubbing paper Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.