German HTechMT SP125-G asperity comparison board
The German HTechMT SP125-G asperity comparison plate is used to evaluate the surface roughness after sand blasting. The SP125-G asperity comparison plate has four measurement areas, namely 25 μm, 60 μm, 100 μm, and 150 μm.
HTechMT
SP125-G
-
IPRE SR600 anchor pattern instrument shot peening sand blasting Roughness Gauge 0~2000a large range
$ 275.00 -
LEEB432 Surface Roughness Tester multiparameter measurement Measurement range 160μm
$ 980.00 -
Roughness Gauge Probes (Sensors) KAIRDA KS120 Small Hole Probe
Login -
Surface roughness instrument AMITTARI AR-132B digital Surface Roughness Tester
$ 1060.00 -
Defelsko positector SPG1 Roughometer
$ 890.00
Introduction
The SP125 series surface roughness comparison plates are used to evaluate the surface roughness after sand blasting or shot blasting surface treatment. SP125-G is used to evaluate surface roughness after sand blasting. SP125-S is used to evaluate surface roughness after shot blasting. Implementation standards: ASTM D 4417 Method A, ISO 8503-1 and ISO8503-2
Specifications
| Instrument model | SP125-G | SP125-S |
| describe | 25 μm (Zone 1) | 25 μm (Zone 1) |
| 60 μm (Zone 2) | 40 μm (Zone 2) | |
| 100 μm (Zone 3) | 70 μm (Zone 3) | |
| 150 μm(Zone 4) | 100 μm (Zone 4) |
HTechMT SP125-G Asperity comparison boardSpecifications
| LIST | VALUE |
|---|
HTechMT SP125-G Asperity comparison board Packing list
Comparison Board X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveJJF 1105-2018
- ActiveJJG 2018-1989
- ActiveHB 6172-1988
- ActiveGB/T 42671-2023
- ActiveHG/T 20720-2020
- ActiveQB/T 2693-2005