German HTechMT SP125-S asperity comparison board
The four measurement areas of the German HTechMT SP125-S asperity comparison plate are 25μm, 40μm, 70μm and 100μm respectively. The SP125-S asperity comparison plate is used to evaluate the surface roughness after sand blasting
HTechMT
SP125-S
-
IPRE RA150 asperity Profile Gauge resolution 0.02μm
$ 11738.00 -
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Login -
LEEB462 surface roughness multiparameter measurement supports bluetooth printing and mobile app
$ 1314.00 -
Roughometer extension rod KAIRDA KS55
Login -
PRSR300 Roughness Gauge
$ 1283.00
The SP125 series surface roughness comparison plates are used to evaluate the surface roughness after sand blasting or shot blasting surface treatment. SP125-G is used to evaluate surface roughness after sand blasting. SP125-S is used to evaluate surface roughness after shot blasting. Implementation standards: ASTM D 4417 Method A, ISO 8503-1 and ISO8503-2
HTechMT SP125-S Asperity comparison boardSpecifications
| LIST | VALUE |
|---|
HTechMT SP125-S Asperity comparison board Packing list
Comparison Board X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- On surface roughness Measuring method Optical inspection, Mechanical, Atomic Force Microscope (AFM)
- Coating surface roughness testing
- ActiveJJF 1105-2018
- ActiveJJG 2018-1989
- ActiveHB 6172-1988
- ActiveGB/T 42671-2023
- ActiveHG/T 20720-2020
- ActiveQB/T 2693-2005
- ActiveGB/T 13288.2-2011
- AbolishGB/T 6060.5-1988