JINGKELIAN SISI adhesion board, suitable for measuring the surface paint film of plastic and wood furniture
SISI adhesion hundred grid board, also known as guide grid gauge, cut mark spacing 1mm, 1.5mm, 2mm, 3mm, cut mark length 35mm, cut mark number 11, in line with the standard BS3962-6, GB4893.4-85.
JingKeLian-
TRUIT TR 5001/3 Single top coat Cross Hatch Cutter 1.5mm/11 teeth
$ 145.00 -
TQC SP1702 cross-cut cutter head 6 teeth, pitch 1mm for CC2000/CC3000 series
$ 346.00 -
Shanghai PUSHEN 2mm multi-blade cross-cut cutter head
$ 148.00 -
JINGKELIAN SISI adhesion board, suitable for measuring the surface paint film of plastic and wood furniture
$ 172.00 -
TQC SP3020 adhesion tape 3M adhesion 7.6 N/cm
$ 162.00
Introduction
JinKeLian SISI adhesion test board is mainly suitable for the determination of the cross-hatch adhesion of organic coatings. It is not only suitable for laboratories, but also can be used for construction sites under various conditions.
Principle
JinKeLian SISI adhesion check board uses tools of certain specifications to cut and penetrate the coating as a grid pattern, and the completed graphics are classified into six grades to evaluate the adhesion effect of the separation of the coating from the substrate.
Application
1. It is suitable for measuring the adhesion strength of the paint film on the surface of plastic and wooden furniture with a thickness of less than 250mm on the substrate.
2. It is suitable for the strength of adhesion on the surface of sprayed or electroplated products or the strength of the combination of primers and topcoats.
Pictures

JingKeLian SISI Adhesion hundred grid boardSpecifications
| LIST | VALUE |
|---|---|
| Tooth spacing | 1mm、1.5mm、2mm、3mm |
| cut length | 35mm |
| Number of teeth | 11 teeth |
| application standard | BS3962-6、GB4893.4-85 |
| Gross Weight | 1KG |
| packing size | 250*190*110mm |
| Appearance material | stainless steel |
| material | stainless steel |
| principle | The coating is cut into a lattice pattern and penetrated to the base material by a specific tool, and then the adhesion effect of the coating separation from the substrate is evaluated according to the six-level classification. |
| function | Coatings are tested for film adhesion on surfaces such as plastic, lame plating or Eletroplating products. |
JingKeLian SISI Adhesion hundred grid board Packing list
1 hundred grid board, 1 magnifying glass, 1 brush, 1 cross-cutting knife, 1 box of blades
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveJJF 2163-2024
- ActiveSJ 20910A-2018
- ActiveHG/T 5173-2017
- ActiveNF
- ActiveSY/T 4106-2016
- Active 002-2017
- ActiveGB/T 13217.7-2023
- GB/T 4893.4-2023
- ActiveGB/T 42541-2023
- ActiveHG/T 2006-2006
- ActiveGB/T 9286-2021
- ActiveHG/T 20720-2020
- ActiveHG/T 5776-2020
- ActiveHG/T 5187-2017
- ActiveHG/T 5299-2018
- ActiveHG/T 3829-2006
- ActiveASTM D3359-2023
- ActiveHG/T 4758-2014
- ActiveHG/T 4761-2014
- ActiveGB/T 23999-2009


SISI






