ZHANYI 80μm φ 17mm L1200mm production wire rod, control Flow rate and coating leveling

Introduction

The Spread Wing Production Type Wire Bar is an extruded custom wire rod with chrome plating on the surface and good finish and wear resistance. The 80μm Φ17mm L1200mm production type wire rod is a customized wire rod with a control film thickness of 80 microns, a diameter of 17mm, and a rod length of 1200mm, and the achievable coating width is 1000mm.

The production profile wire rod is a metering rod used to adjust the flow rate of the coating in the coating production system and smooth the uniformity of the pre-coating, and is often used in the coating fields such as paper printing, pressure-sensitive paper, and film.

Other specifications of the wing-spreading custom wire rod can be used [Wire rod customization tool】.

Features

1. Spread-wing production type wire rod extrusion type, no worry of broken wire, smooth surface curve, easy to clean.

2. The surface of the production profile wire rod is chrome-plated, which improves the wear resistance and corrosion resistance of the metering rod, and also increases the surface finish.

3. The film thickness accuracy controlled by the wing-spreading production rod is 1 micron, and there are 10cm clamping parts at the left and right ends.

Product parameters

Actual picture of the product

Applications

Spreadwing's production of wire rods is widely used in glass window films, cardboard, pressure-sensitive paper, films, printing and other fields, as a component of the coating system.

Stainless Steel Main Rod X1 Transparent External Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.