CEPRI QH300W5-70 temperature impact Test Chamber

The QH300W5-70 rapid temperature change damp heat Test Chamber is suitable for the applicability test of electrical and electronic products under the condition of cold resistance test, rapid temperature change or gradual change, especially suitable for the environmental adaptability screening test of electrical and electronic products.

Features

1. The appearance adopts the international popular three-dimensional design, with a strong three-dimensional sense and beautiful appearance. Adopting the popular industrial color scheme, the colors are smooth, the contrast is high, and the sense of fashion is strong.

2. The functional interface (network interface, sample power terminal) is integrated and centrally arranged on the left side of the equipment, which is convenient for users to operate.

3. Equipped with automatic water supply water purification device.

4. New waterway circulation system. It is equipped with a pre-filter, an electromagnetic water pump is used for water supply, and an electric valve is used for drainage, which greatly improves the reliability of the waterway system.

5. 7-inch color LCD touch screen controller, friendly control interface, user-friendly operation, with WEB remote control function, convenient for users to use.

6. Independent integrated self-balancing air pressure balancing device to ensure that the air pressure in the box is basically the same as that of the outside during the test.

Special industrial motor, with low noise, low temperature, high-low temperature and humidity resistance.

QH300W5-70 rapid temperature change damp heat Test Chamber meets the standard

GB/T 2423.1-2008 Low temperature test method Ab

GB/T 2423.2-2008 High temperature test method Bb

GJB 150.3A-2009 High Temperature Test

GJB 150.4A-2009 Low temperature test

GB/T 2423.3-2006 Constant damp heat test method Cab

GB/T 2423.4-2008 Alternating damp heat test method Db

GJB 150.9A-2009 Damp heat test

Operating Environment

Temperature: 5°C~35°C

Relative Humidity: ≤85%

Air pressure: 86kPa~106kPa

Standard configuration

Φ100 cable holes: 2 (1 on the left and right sides of the box, with 2 rubber stoppers)

LED Lighting: 5W 1pcs

Wet-bulb gauze: 10 pcs

Sample holders: 2 sets

Sample rack shelves: 4

Installation environment requirements

The ground is level, and the inclination of the installation position of the equipment does not exceed 1°

The ground load capacity is not less than 800kg/m²

The venue is well ventilated

There are no strong vibrations around the device

There is no strong electromagnetic field around the device

There are no flammable, explosive, corrosive substances and dust around the equipment

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.