LEICI AT-21 Formaldehyde Detector Simultaneously Measuring temperature, Humidity, formaldehyde

Introduction

The formaldehyde Detector is a special instrument for detecting the concentration of formaldehyde in the environment. It can measure the temperature and humidity in the environment at the same time.Leci AT-21 formaldehyde Detector is a formaldehyde detection instrument that uses imported high-performance electrochemical sensors and built-in temperature and humidity sensors. It can monitor the formaldehyde concentration, temperature and humidity in the air in real time, and understand the health status of the environment. . AT-21 formaldehyde Detector is suitable for testing in offices, residential places, cars, furniture and other environments.

Power on/off method

1. Start-up method: Press and hold the switch key of the AT-21 formaldehyde Detector until the Detector is turned on. It will first display all 0s. After about 15 seconds, the environmental data monitored by the sensor will be displayed.

2. Shutdown method: Press and hold the switch key of the AT-21 formaldehyde Detector until the screen display of the formaldehyde Detector disappears and the monitor shuts down.

Display content

The real-time formaldehyde concentration and temperature and humidity values ​​can be easily read in the formaldehyde concentration, temperature, and humidity display areas of the AT-21 formaldehyde Detector display screen . The outer display area of ​​the display screen is a power display, which can display the battery power status in real time.

Influencing factors

The ON/OFF key of the AT-21 formaldehyde Detector is affected by small organic molecules such as alcohols, aldehydes, ketones, and phenols, such as methanol, ethanol, acetone, phenol, etc. Therefore, the influence of these factors should be confirmed or avoided during the measurement process.

skills

1. When the AT-21 formaldehyde Detector is turned on, press the power button continuously to switch the display brightness;

2. When used indoors, it is recommended to use a power adapter for power supply;

3. When used in the car, it is recommended to use the vehicle power supply;

4. When used inside furniture, it can be powered by AA batteries;

5. The AT-21 formaldehyde Detector will automatically shut down when the battery is too low.

Product actual pictures

host x1, power cord x1, car charger x1, user guide x1, No. 5 battery x3.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.