UK Elcometer 3580/7 fine-tuning Film Applicator adjustable drawdown blade Film Applicator 600μm/200mm
Wet film thickness 0~6000μm, application width 200mm, accuracy +/- 10μm, anodic oxidation aluminum material, with extended edges can be folded in the film process coating, is a laboratory film instrument.
Elcometer
Elcometer 3580/7
-
TRUIT TR 3008/60/5 frame coating applicator 50/100/150/200μm
$ 170.00 -
HuiNuo KTQ-350S Micrometer Applicator, magnetic drawdown blade application width 350mm
$ 572.00 -
TQC SH1142 VF1824 Micrometer Film Applicator 250mm Micrometer Film Applicator
$ 2133.00 -
PUSHEN /Pushen SZQ-800um Single Sided Film Applicator Single Sided Moulding 800μm
$ 142.00 -
PUSHEN /Pushen SZQ-900 Single-sided manual coating applicator film thickness 900μm
$ 142.00
Instrument Introduction
Available in a wide range of film widths and with extended edges to collect paint during the application process, the Elcometer 3580 is the lab's coat instrument.
The film thickness can be adjusted from 0 to 6 mm and spanning 10 microns with two integrated fine adjustment knobs.
3580 is recommended for coated sheets made of anodized aluminum, with bevel blades, when manually coating liquids of high concentration and viscosity on a solid and flat substrate.
Series selection
| Model | Film thickness | Coating film width | |
| 3580/1 | 0~5000μm | 50mm | 2 inches |
| 3580/2 | 0~6000μm | 75mm | 3 inches |
| 3580/3 | 100mm | 4 inches | |
| 3580/4 | 125mm | 5 inches | |
| 3580/5 | 150mm | 6 inches | |
| 3580/6 | 175mm | 7 inches | |
| 3580/7 | 200mm | 8 inches | |
Elcometer Elcometer 3580/7 Trimmer Film ApplicatorSpecifications
| LIST | VALUE |
|---|---|
| type | Adjustable |
| WFT | 0~6000μm |
| Application width | 200mm |
| Accuracy | ±10μm |
| material | Aluminum anodic oxidation |
| standard | ASTM D 823-E |
Elcometer Elcometer 3580/7 Trimmer Film Applicator Packing list
Film applicator x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ELCOMETER 123 Surface Roughness Tester Operation Method
- Elcometer 456 A456CFNFBI1 Coating Thickness Gauge Beauty Appreciation
- Comparison of two concrete Coating Thickness Gauges
- Eletroplating Nickel Thickness Gauge Selection Case on Steel
- British elcometer Coating Thickness Gauge classification
- What is the accuracy of Elcometer Coating Thickness Gauge?
- One article takes you to know glossiness, reflectance and fog shadow
- Elcometer 506 Adhesion Tester Features
- Elcometer 456 Coating Thickness Gauge
- Elcometer 355 Coating Thickness Gauge Iron and non-iron based probe selection table