LEICI PH STIP-scan DZS-708L-01 0.001 PH value

Introduction

Thunder Magnetic PH Water Quality Tester DZS-708L-01 is a combination of DZS-708L host and PH module, which realizes the pH detection of water quality, etc., with an instrument level of 0.001PH and a measurement range of -2.000~19.999pH.DZS-708L-01 PH water quality Tester is an intelligent testing instrument, which can realize the management operations such as query, statistics, storage, and output of measurement data, and has powerful management functions, which can manage users, safety, calibration, interface, etc., which is more powerful than the general PH meter.

Introduction to the PH module

1. pH calibration, support automatic identification of 25 kinds of pH buffer solutions such as GB, DIN, NIST, etc., up to 6 points of calibration

2. Standard group management function, allowing users to create their own pH standards

3. Support calibration editing, such as deleting and adding calibration points, and the calibration speed is fast

4. A variety of commonly used ion modes are provided randomly, such as H+, Ag+, Na+, K+, NH4+, Cl-, F-, NO3-, BF4-, CN-, Cu2+, Pb2+, Ca2+, etc., and are supported at the same time

    User-defined

5. Support direct reading concentration measurement method, standard addition measurement method, sample addition measurement method, and GRAN measurement method

6. With standard group management function, allowing users to create their own standard solutions

7. A variety of measurement units are available: pX, mol/L, mmol/L, g/L, mg/L, ug/L

Features and advantages

1. Modular design, 4 kinds of modules are plug and play, and you can combine them as you like!

   ●Four-channel, automatic identification, plug and play;

   ●PH water quality TesterSupports Celsius (°C) or Fahrenheit (°F) temperature display

   ●Including pX measurement unit, ORP measurement unit, conductivity measurement unit, dissolved oxygen measurement unit and other measurement modules, any combination of modules;

   ●Support U disk hot swap, use U disk to upgrade firmware

2. Multiple reading modes, reading is easier

   ●Timed-Read function (timed measurement mode): It supports two timed reading modes: timed stop measurement and timed automatic interval measurement, saving time and effort.   

   ●Smart-Read function (balance measurement mode): "fast, medium, strict" 3 balance conditions for you to choose, and support "custom" to set the balance conditions, reading is easier.

   ●Cont-Read function (continuous measurement mode): The continuous change process of the sample can be clearly grasped.

3. Intelligent operating system, navigation-based operation experience, double the experience!

   ●Electrode management function: electrode ID management (5 electrodes for each type of electrode, 20 sets of data for each electrode), recording electrode calibration history, and reminding electrode life   

   ● User management function: user ID and password management, up to 8 user login passwords  

   ● Security management function:PH water quality TesterSupport self-diagnosis and power-off protection functions

   ● Calibration management function: automatic identification of buffer solution, PX measurement module supports 6-point calibration; Support calibration editing, such as deleting and adding calibration points, and the calibration speed is fast

   ● Interface management function: support the creation of shortcuts, multiple ways to enter the start measurement interface; 7-inch color touch screen, support backlight setting adjustment, suitable for different laboratory conditions.

4. Super data management function, in line with GLP specifications, traceable information is super complete and super!

   ●Data reference: The storage data can be checked according to the storage number, storage time, operator ID, method name, measurement sample ID, electrode ID, etc., and the query results are displayed in the form of curves

   ●Data storage: mass storage, the storage capacity of measurement results of each measurement module is not less than 1000 sets

   ●Statistics:PH water quality TesterIt supports the statistics, analysis, and comparison of measurement results

   ●Data input: support reading U disk to store measurement data

   ●Data output: RS-232 interface and USB interface, support U disk flash memory; Allows users to compile printout requirements, usually there are three output methods: by GLP format, standard format,

      User-defined formatting.

5. Support to connect to the autosampler, batch measurement is as simple as that  

   ●Real-time display of relevant test methods, measurement curves, measurement results, and dynamic display of measurement curves

   ●PH water quality TesterSupport for viewing, creating, copying, editing, and deleting measurement methods

   ●Support connection to SCH-01 autosampler to realize automatic measurement of multiple samples and automatic calibration of pH electrode

   ● Two key input methods: characters and numbers

6. Chinese and English two operating languages are optional

Applications

PH water quality Tester DZS-708L-01 is suitable for universities, environmental protection, food, drinking water, industrial wastewater and other industries.

Actual picture of the product

DZS-708L host x1, PH module x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.