LEICI DZS-706C multiparameter Water Quality Analyzer measurement conductivity/dissolved oxygen concentration/temperature value

Introduction

The DZS-706C multi-parameter Water Quality Analyzer is equipped with a temperature sensor to detect the dissolved oxygen concentration value, temperature value and conductivity value of the aqueous solution, and can realize the automatic temperature compensation function.DZS-706C multi-parameter Water Quality Analyzer conductivity grade is 1.0, measurement of dissolved oxygen concentration resolution of 0.01mg/L, and response time is not less than 45s, with timing measurement, continuous measurement, balance measurement three measurement modes, can be connected to the computer through the USB interface.

Features and functions

●Comply with GLP specifications, the maximum storage capacity is 2200 sets;

●DZS-706C multi-parameter Water Quality AnalyzerIt can measure conductivity, resistivity, TDS, salinity, temperature, dissolved oxygen and other parameters at the same time;

●Automatic calibration, manual/automatic temperature compensation, maintain a reasonable temperature environment;

●It has three measurement modes: continuous measurement, timing measurement and balance measurement;

●Communication with PC can be done through standard USB communication interface and REX instrument communication software.

Module features

1. Dissolved oxygen measurement module function

DZS-706C multi-parameter Water Quality AnalyzerIt has the functions of automatic zero oxygen calibration and full calibration, and can realize two calibration methods: air pressure calibration and salinity calibration.

2. Conductivity measurement module function

1）DZS-706C multi-parameter Water Quality AnalyzerIt supports the measurement of conductivity, resistivity, TDS, and salinity.

2) Automatic calibration, automatic range switching, can calibrate the cell constant or TDS conversion coefficient. Among them, DZB-718 supports 2-point calibration.

Actual picture of the product

Multiparameter analyzer x1, DJS-1C platinum black electrode x1, DO-958-S dissolved Oxygen electrode x1, T-818-B-6 temperature sensor x1, manual x1, certificate x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.