JIECHENG HH-4S Dual Series Digital Display Water bath 4 holes
JIECHENG HH-4S dual-row digital Water Bath has double-row four holes, liner size is 320 * 320 * 130mm, HH-4S dual-row digital Water Bath adopts PID temperature controller, which can realize room temperature + 3~ 100 ℃ temperature control range, input Power is 800W.
JieCheng-
RONGHUA HH-1B digital thermostatic Water Bath
$ 138.00 -
HUITAI HWS-11 Thermostatic Water Bath single row single hole
$ 170.00 -
DADI HH-600 Thermostatic water bath thermostatic water bath
$ 172.00 -
Honghua CH-2 digital display constant temperature Water Bath 2 holes
$ 155.00 -
HUXI high temperature Dry Bath optional module HX01 6.5mm aperture * 48 holes
$ 142.00
Introduction
Jiecheng HH-4S double-row digital display Water Bath is suitable for laboratories and laboratories of ** units, universities, scientific research, chemical printing and dyeing enterprises and institutions, and is used for distillation, drying, concentration and constant temperature heating of chemical samples and biological products.
Characteristics:
1. The inner tank is made of 304 stainless steel, which does not rust.
2. Intelligent controller, good temperature control effect, a large number of exports to European countries.
3. The temperature parameters are displayed on one digital screen.
4.It is made of stainless steel, and the outside of the box is made of good steel plate, which is beautiful and novel.
5.The large LED screen display shows the measured temperature.
6.The electric heating pipe is made of U-shaped steel pipe, sintered magnesium oxide and heating wire, which is directly immersed in water and has less heat loss.
Introduction to controls
★ The microcomputer P.I.D. temperature controller with over-temperature deviation protection and digital display is adopted, with timing function, and the temperature control is accurate and reliable.
★ Incoming call recovery, parameter encryption, temperature correction and other functions.
★ With the function of power-off recovery, the equipment can automatically resume operation according to the original program after the external power supply suddenly loses power and the power comes again.
Security settings
★ Thoughtful safety protection design realizes triple safety protection for personnel, samples and equipment
★ Safety functions: sensor fault alarm, over-current trip protection, etc
Pictures

JieCheng HH-4S Water bathSpecifications
| LIST | VALUE |
|---|---|
| Temperature range | RT+3~100℃ |
| Temperature Fluctuation | ±0.1℃ |
| Temperature Resolution | 0.1℃ |
| Tank Volume | 13L |
| Total Power | 1000W |
| Power supply Voltage | AC 220V 50Hz |
| Display mode | LED |
| Environmental temperature | 5~40℃ |
| Tank Size | 320*320*130mm |
| number of holes | Double row four holes |
| Tank Size | 320*320*130mm |
JieCheng HH-4S Water bath Packing list
integrated host x1, power cord x1, manual x1, certificate x1, warranty card x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Instructions for assembly and use of Thermostat
- Precautions for the operation of electric heating constant temperature Water Bath
- Standard operating procedure for SR8 plus stripper
- Synthesis of Polyvinyl Acetate Coatings
- How to determine the lacquer acid value for Paints and varnishes?
- Technical knowledge of Ulabo bath temperature control
- Determination of organic carbon content in different organs of rubber tree by oven heating method
- What are the types of commonly used laboratory equipment?
- German Julabo heating thermostatic bath model comparison table
- Study on calibrating method of Coating viscometer


HH-4S





