LANDTEK VM6360 Vibration Meter Frequency up to 10Hz~ 10KHz
Frequency range 10Hz~ 10KHz, in line with ISO2954 standard; with USB interface and AC signal output; Bluetooth data output can be purchased separately.
LANDTEK
VM6360
-
Pen Vibration Meter AMITTARI AV-160P Digital Display Portable Pen Vibration Meter
$ 270.00 -
LANDTEK VM6360 Vibration Meter Frequency up to 10Hz~ 10KHz
$ 428.00 -
3D three-axis vibration instrument AMITTARI AV-160D simultaneous measurement of three-axis or single-axis vibration parameters
$ 658.00 -
Vibrator AMITTARI AV-160B displays three parameters of "Displacement", "Speed" and "Acceleration"
$ 459.00 -
DUBAN DB22-VM260A12 Vibrator, displacement D 0.001~ 12.0mm
$ 596.00
Introduction
1. The frequency range is wide. In the acceleration mode, the frequency can reach 10Hz~10KHz.
2. VM6360 conforms to the international standard ISO2954, which is used for periodic motion measurement to detect the imbalance and deviation of moving machinery.
3. This type of vibratIon Meter uses "USB data line output" and "RS-232 data line output" to communicate with PC.
4. VM6360 uses a high-performance accelerometer to achieve accurate and reproducible measurements.
5. With AC signal output, it is convenient for auscultation and recording.
6. An optional earphone can be used as a stethoscope.
7. Provide Bluetooth data output option.
8. VM6360 Vibration Meter is specially designed for on-site measurement of various mechanical vibrations, so as to provide data for quality control, running time and prior equipment maintenance.
real shot
LANDTEK VM6360 VibratIon MeterSpecifications
| LIST | VALUE |
|---|---|
| Sensors Type | Piezoelectric Acceleration Sensors |
| Accuracy | ± (5% n + 2) words |
| Displacement Measurement range | 0.001~4.000mm |
| Speed Measurement range | 0.01~400mm/s |
| Acceleration Measurement range | 0.1~400.0m/s² |
| Displacement frequency range | 10Hz~1KHz |
| Speed frequency range | 10Hz~1KHz |
| Acceleration frequency range | 10 Hz~ 1k Hz 10 Hz~ 10k Hz (x10 mode for bearing inspection) |
| Operating Temperature | 0~50℃ |
| Relative Humidity | <90% RH |
| output | 2.0 v AC load resistance 10 k |
| Dimensions | 124*62*30 mm |
| Power | 4 AA batteries |
| Weight | 120 g (without battery) |
| Metric imperial conversion | Convertible |
| Battery Voltage indication | Low Voltage prompt |
| Data output | USB, RS-232, Bluetooth |
LANDTEK VM6360 VibratIon Meter Packing list
Host X1, magnetic suction seat X1, Piezoelectric Sensors X1, probe (cone) X1, probe (ball) X1, portable case X1, instruction manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- CM-8822 Landtek Coating Thickness Gauge
- Comparison table of each model of LANDTEK Thickness Gauge [Selection Guide]