Rhopoint RL-A-FC-FRIKMAR/4 FRIKMAR Flow Cup (4mm) DIN53211

Viscosity range 112~ 685cSt, outflow time 25~ 150s, flow hole diameter 4mm, cup body material aluminum alloy, filter material stainless steel, applicable standard DIN 53211.

Brand

SKU: NB012294

RHOPOINT

Model

RL-A-FC-FRIKMAR/4

Get Quote

RHOPOINT shopSE

Information

Datasheet Catalog

What else did others buy

Genuinegoods

RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cupOverview
Specifications
Comments
FAQs

RL-A-FC-FRIKMAR/4

FRIKMAR flow cup

Viscosity range 112~ 685cSt, outflow time 25~ 150s, flow hole diameter 4mm, cup body material aluminum alloy, filter material stainless steel, applicable standard DIN 53211.

When a fluid flows through a viscosity Flow Cup hole at a given temperature, the viscosity data provided by the Flow Cup is usually expressed in terms of flow time. From this flow time, the viscosity is calculated to centistrs (cSt).

Paints, inks, varnishes and similar industries use Flow Cups to quickly calculate viscosity.

Rhopoint Viscosity CupSuitable for UKAS/ISO 17025 certified oils and meets measurement specifications. The cup body is made of good aluminum alloy.

RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR FLOW CUP DETAIL FIGURE 1

RhopointFull rangeViscosity cups

Model	aperture	Viscosity range	Flow time
BS FLOW CUP
RL-A-FC-PTA6/B2	2.38mm	38- 71cSt	30~300s
RL-A-FC-PTA6/B3	3.17mm	38~147cSt
RL-A-FC-PTA6/B4	3.97mm	71~455cSt
RL-A-FC-PTA6/B5	4.76mm	299~781cSt
RL-A-FC-PTA6/B6	7.14mm	781~1650cSt
*The material of the flow hole is stainless steel;BS 3900 (1971) Old Specification

DIN cup
RL-A-FC-DIN2	2mm	15~30cSt	25~150s
RL-A-FC-DIN4	4mm	112~685cSt
RL-A-FC-DIN6	6mm	550~1500cSt
RL-A-FC-DIN8	8mm	1200~3000cSt
*The material of the flow hole is stainless steel;DIN 53211

FORD FLOW CUP
RL-A-FC-ASTM1	2.1mm	10~35cSt	55~100s
RL-A-FC-ASTM2	2.8mm	25~120cSt	55~100s
RL-A-FC-ASTM3	3.4mm	49~220cSt	55~100s
RL-A-FC-ASTM4	4.1mm	70~370cSt	55~100s
RL-A-FC-ASTM5	5.8mm	200~1200cSt	55~100s
*The material of the flow hole is stainless steel;ASTM D1200 standard

ISO/ASTM Viscosity Flow Cups
RL-A-FC-ISO3	3mm	7~42cSt	30~100s
RL-A-FC-ISO4	4mm	35~135cSt
RL-A-FC-ISO5	5mm	91~325cSt
RL-A-FC-ISO6	6mm	188~684cSt
RL-A-FC-ISO8	8mm	600~2000cSt
*The material of the flow hole is stainless steel;BS EN ISO 2431, ASTM D5125standard

AFNOR Flow Cup
RL-A-FC-AFNOR/2.5	2.5mm	5~140cSt	30~100s
RL-A-FC-AFNOR/4	4mm	50~1100cSt
RL-A-FC-AFNOR/6	6mm	510~5100cSt
RL-A-FC-AFNOR/8	8mm	700~11500cSt

FRIKMAR viscosity Flow Cups
RL-A-FC-FRIKMAR/2	2mm	15~30cSt	25~150s
RL-A-FC-FRIKMAR/4	4mm	112~685cSt
RL-A-FC-FRIKMAR/6	6mm	550~1500cSt
RL-A-FC-FRIKMAR/8	8mm	1200~3000cSt
*The material of the flow hole is stainless steel;DIN 53211standard

RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cupSpecifications

LIST	VALUE
Viscosity range	112~685cSt
outflow time	25~150s
flow hole diameter	4mm
Cup body material	aluminum alloy
Filter material	stainless steel
Handle material	Yes.
Applicable standards	DIN 53211

RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cup Packing list

Viscosity cup × 1, factory certificate × 1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

I want to do a test on the JJG743 standard. Is this FRIKMAR flow cup okay?

[A]

Sure

+RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cup Big data

+RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cupKnowledge

+RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cupStandard

+Navigation

Rhopoint RL-A-FC-FRIKMAR/4 FRIKMAR Flow Cup (4mm) DIN53211

RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cupOverview

RhopointFull rangeViscosity cups

RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cupSpecifications

RHOPOINT RL-A-FC-FRIKMAR/4 FRIKMAR flow cup Packing list

FAQ