Coating adhesion drawing instrument FZ-10 RONGJIDA metal, concrete coating adhesion detection

Introduction

Rongjida FZ-10 Coating Adhesion Puller is a portable pull-out adhesion Tester with an integrated structure design and a liquid crystal display for measurement data.This FZ-10 coating adhesion puller is newly developed and manufactured by Rongjida Company for testing the adhesion of metal, concrete and other material coatings. It is suitable for laboratories or On-site testing, no need for external power supply, adjustable display mode force value and strength, automatic calculation of testing results according to the size of the pulling head.

Features

1. FZ-10 coating adhesion puller is portable, integrated design, door-shaped structure.

2. The force value (KN) and intensity (MPa) of the display mode can be adjusted.

3. The measurement data is displayed on the large LCD, which is intuitive and easy to read, and has a liquid crystal lighting function, which is convenient for construction inspection at night.

4. It has the function of indicating the pressurization rate, which is convenient for observing and adjusting the pressurization rate.

5. The drawing and casting size, measurement unit and storage data can be selected by buttons.

6. FZ-10 coating adhesion puller can automatically calculate the result according to the size of the drawing head.

7. With peak hold function, it can store 500 pieces of test data.

8. Numerical correction 5-segment broken line numerical correction to ensure the highest accuracy.

9. No need for external power supply, it can be used in any place, including laboratory and field.

Standards

FZ-10 Coating Adhesion Pulling Tester complies with the standards GB/T 5210-2006 "Pull-Off Adhesion Test of Paints and Varnishes" and TB-T2965-2011 "Technical Conditions for Railway Concrete Bridge Deck Waterproof Layer".

Pictures

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.