Elcometer 123 E123A--M-surface roughness meter, metric system
The surface of the Elcometer 123 E123A--M-Surface Roughness Tester is displayed in imperial units, and the thickness measurement range is 0~1000 μm. The Elcometer 123 Surface Roughness Tester measures the height of the spray-treated surface from the peak to the valley.
Elcometer
E123A--M-
-
AMITTARI AR-131A + sand blasting shot peening Roughness Gauge Measurement range 0~750a
$ 467.00 -
LEEB451 Surface Roughness Tester Measurement parameters Ra/Rz/Rq/Rt
Login -
Defelsko SPGS3 Roughometer positector SPG S Advanced
$ 1509.00 -
Surface roughness instrument AMITTARI AR-132C Portable precision Surface Roughness Tester
$ 778.00 -
LANDTEK SRT-6223 sand blasting shot peening Roughness Gauge printing, lame plating
$ 462.00
Introduction
The Elcometer 123 Surface Roughness Tester (analogue instrument) is simple to use and is similar to the Elcometer 224 in that it measures the height of a jetted surface from the peak to the valley.There are metric and EnglishAvailable in two versions.
Meets standards
ASTM D 4417-B、SANS 5772、SSPC PA 17、US Navy NSI 009-32、US Navy PPI 63101-000标准.
Product display
Elcometer E123A--M- Surface roughness meterSpecifications
| LIST | VALUE |
|---|---|
| Display mode | Pointer |
| Measurement range | 0~1000μm |
| Dimensions | 105*55*25mm |
| Product Weight | 335g |
| Applicable standards | ASTM D 4417-B, SANS 5772, SSPC PA 17, US Navy NSI 009-32, US Navy PPI 63101-000 |
| Scale | 2µm |
Elcometer E123A--M- Surface roughness meter Packing list
Elcometer 123 surface roughness instrument host sx1, Glass plate x1, 2mm hexagonal wrench x1, carrying case and operation manual x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ELCOMETER 123 Surface Roughness Tester Operation Method
- Elcometer 456 A456CFNFBI1 Coating Thickness Gauge Beauty Appreciation
- Comparison of two concrete Coating Thickness Gauges
- Eletroplating Nickel Thickness Gauge Selection Case on Steel
- British elcometer Coating Thickness Gauge classification
- What is the accuracy of Elcometer Coating Thickness Gauge?
- One article takes you to know glossiness, reflectance and fog shadow
- Elcometer 506 Adhesion Tester Features
- Elcometer 456 Coating Thickness Gauge
- Elcometer 355 Coating Thickness Gauge Iron and non-iron based probe selection table
- ActiveJJF 1105-2018
- ActiveJJG 2018-1989
- ActiveHB 6172-1988
- ActiveGB/T 42671-2023
- ActiveQB/T 2693-2005
- ActiveGB/T 13288.2-2011
- AbolishGB/T 6060.5-1988