Elcometer 270 D270----4C Holiday Detector with calibrated certificate
Elcometer 270 Holiday Detector D270----4C with calibrate certificate, supports 9V, 67.5V and 90V three Voltages, Elcometer 270/4 Holiday Detector can use NiMH rechargeable batteries, setting Accuracy to +/- 5%.
Elcometer
D270----4C
-
Kedian DJ-6-B Holiday Detector high Voltage type, detection Film thickness 0.05~ 10mm
$ 568.00 -
Defelsko PosiTest LPD C Low Voltage Holiday Detector Advanced Configuration
$ 1398.00 -
KODIN 6DJ50 Holiday Detector anticorrosive coating Holiday Detector 35mm/50KV
$ 1003.00 -
KODIN 6DJ30 Holiday Detector 10mm/31.5KV
$ 599.00 -
LEEB720 digital spark Detector high Voltage leak Detector
$ 562.00
Introduction
The Elcometer 270 Series utilises wet sponge technology and has been designed to set a new standard in wet sponge Detectors – high quality, low Voltage and accessories similar to those of high Voltage spark Detectors.
The instrument is supplied ready and ready for use
Automatic sensitivity calibration and Voltage check
Low power indication
Visual alarm and audible alarm
Stick integration and splitting function
Includes a variety of rod attachments and is interchangeable
Three models – single, dual, or triple-Voltage
Easy to disassemble anti-wear cable
Large standard sponge
§ The test kit is available as an accessory to meet all the needs of the user
Meets standards
Elcometer 270 Pinhole Tester complies with AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384.
Pictures
Elcometer D270----4C Holiday DetectorSpecifications
| LIST | VALUE |
|---|---|
| detection Voltage | 9V/67.5V/90V |
| Thickness range | 0~500µm |
| Sensitivity | 9V: 90kΩ ±5%；67.5V: 125kΩ ±5%；90V: 400kΩ ±5% |
| Operating Time | 9V: up to 200 hours; 67.5V: up to 100 hours; 90V: up to 80 hours |
| Power Supply | 3 x AA (LR1600) 1.5V alkaline batteries; (NiMH rechargeable batteries can also be used, battery life will be reduced by up to 75%) |
| Set Accuracy | ±5% |
| Host size | 210 * 42 * 37Mm (without rod) |
| Weight | 610G (21oz) with rod body, wire and battery |
| Standard wire size | 175Mm (6.9 ") long (with sponge) |
| Flat sponge size | 约 150 x 60 x 25mm |
| meet the standard | AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384 |
| Calibrated Certificate | Yes. |
Elcometer D270----4C Holiday Detector Packing list
Holiday Detector host x1, standard rod body and flat sponge x1 each, 4m (13 '2 ") loop wire with alligator clip x1, LR1600 (AA) battery x3, operation manual x1, calibrate certificate x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ELCOMETER 123 Surface Roughness Tester Operation Method
- Elcometer 456 A456CFNFBI1 Coating Thickness Gauge Beauty Appreciation
- Comparison of two concrete Coating Thickness Gauges
- Eletroplating Nickel Thickness Gauge Selection Case on Steel
- British elcometer Coating Thickness Gauge classification
- What is the accuracy of Elcometer Coating Thickness Gauge?
- One article takes you to know glossiness, reflectance and fog shadow
- Elcometer 506 Adhesion Tester Features
- Elcometer 456 Coating Thickness Gauge
- Elcometer 355 Coating Thickness Gauge Iron and non-iron based probe selection table