Metal Surface Glossiness Detection Instrument JFL-B60M JFL 60 Degree Glossiness Detection Instrument

Introduction

Jinfulan JFL-B60M Metal Surface Gloss Tester is a testing instrument with a projection angle of 60 degrees and is used to measure the gloss of metal surfaces. The measuring range is 0~199.9Gs. JFL-B60M Metal Surface Gloss Tester is a high-precision, miniaturized gloss Tester manufactured in accordance with the ISO-2813 standard. It is suitable for specular gloss testing of coatings, paints, inks, plastics, stones, floors, and wooden furniture surfaces. The measurement conforms to ISO, ASTM and other domestic (CN) and foreign standards.

Applications

JFL-B60M Metal Surface Gloss Tester is mainly used to measure metal surface gloss, and can also be used to measure paint, paint, ink, plastic, stone, floor, wood, etc. in the range of 0~199Gs.

product structure

operation method

1. Press the switch of the JFL-B60M Metal Surface Gloss Tester , place the JFL-B60M Metal Surface Gloss Tester on the black glass calibration plate, and turn the adjustment knob to make the displayed value the same as the nominal value of the standard plate.

2. Put the JFL-B60M metal surface gloss Detector on the white ceramic standard plate, and the error between the displayed value and the nominal value of the white ceramic standard plate should not be greater than ±1.2 gloss units, otherwise, the standard plate is dirty and other issues should be considered .

3. When the error is out of tolerance, calibrate again according to the previous two steps.

4. Measure the sample after calibration, when the measured value exceeds 199.9 gloss units, the display overflows "1".

Pictures

host (including battery) x1, standard board (including blackboard, whiteboard) x1, manual x1, product certificate x1, instrument case x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.