SILE 84-1A4 magneticstirrer

overview

The magnetic stirrer has four stirring stations, and the four stirring stations can be used at the same time or independently, and the speed of each of the four stations is adjusted separately.

Instructions

1. Trial run: Before use, perform a professional no-load test run; connect the power, turn on the power switch, adjust the speed control knob clockwise, and listen carefully to hear the sound of the motor turning from slow to fast. If there are other abnormal noises, the cause needs to be found out. Can only be used after exclusion.

2. Stirring operation: put the machine flat, put the container containing the night in the center of the workbench (that is, the electric furnace), put a suitable stirrer in the container, (it needs to be sucked into the center, use a cylindrical stirrer for a flat-bottomed container, and a spherical stirrer. The container can be turned on with a spinning agitator). The container should not be made of iron or materials related to magnetism, the thickness of the bottom should not be greater than 10mm, and it should be smooth. The stirring speed should be gradually accelerated from slow to fast. If the acceleration is too fast, the stirring bar will easily escape. If the stirring bar is not in the center of the container, you can turn on the stirrer first, let it idle for a while and then turn it off, the stirring bar will automatically suck into the center.

3. After the instrument is used, unplug the power, clean the appearance, and keep it after cooling down.

4. Note: The power supply needs to be reliably grounded; the solution in the container should not be overfilled, so as not to overflow when stirring.

Host X1, Stir 3 X4 (bags), warranty card X1, certificate X1, manual X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.