Lambo Huike LB-BT10 paper cup body stiffness Tester

Introduction

Lambo Huike LB-BT10 Paper Cup Body Stiffness Tester is used to measure all kinds of paper cups with paraffin wax, polyethylene film and other substances on the surface, which are used to hold cold and hot drinks and ice cream, and can also be used for paper bowls and plastic cups Measurement of body stiffness.

Features

Labo LB-BT10 paper cup body stiffness Tester adopts single-chip microcomputer control technology, double-probe transmission device and double-probe measurement (double-probe sensors) to ensure uniform force. Fully automatic test completion, automatic reset, LCD Chinese display, test data memory and statistical processing functions (printer printout single measured value, average value, maximum value and minimum value).

Test description

Put the test sample on the sample stand of the cup body stiffness Tester, adjust the height of the sample stand so that the measuring head is close to the side wall of the sample, and the vertical distance between the side measuring head and the bottom of the cup is three times the cup height. 2/2, and make the cup body seam of the paper cup to be tested face the Tester, turn on the instrument, and measure the cup body stiffness.

Note: 5 paper cups are measured for each sample, and the measurement result is expressed as the average value, accurate to 0.01N.

Applicable standard

GB/T27590-2011

QB/T2294

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.