LABO 17074 Corrugated Cardboard adhesive strength test stand
Measure the adhesive strength between corrugated Cardboard layers, made of stainless steel, in line with GB and QB standards.
Labo
17074
-
Huicheng DTA-1250 Differential Thermal Analyzer Differential Thermal Analysis Linear dispersion 1250 ℃
$ 3564.00 -
HUITAO HT-201 Crushed Stone Impact Tester Automotive coating anti-rock Tester, high-end version
$ 9156.00 -
QIWEI WS70-1 Infrared Drying Oven rapid drying equipment
$ 154.00 -
AMITTARI FM-210V5 Portable Flow Meter 0.01-5 m/s
$ 369.00 -
CEM DT-2G microwave leakage radiation Detector high-precision portable
$ 123.00
Introduction
LABO Huike LABO 17074 Corrugated Board Bonding Strength Test Rack is used to measure the bonding strength between corrugated board layers, such as single-layer corrugated board, that is, the bonding strength between face paper and corrugated paper, corrugated paper and inner paper, which is a special , Standard test equipment.
Features
LABO Huike LABO 17074 corrugated cardboard adhesion strength test frame is made of stainless steel, suitable for various flute types, and can adjust various flute distances arbitrarily.
product display
Labo 17074 Cardboard adhesive strength test standSpecifications
| LIST | VALUE |
|---|---|
| material | stainless steel |
| Upper pressure needle length | 30±1mm |
| Lower support pin length | 40±1mm |
| Weight | 0.8kg |
| applicable standard | GB/T6548-2011、QB/T1671、TAPPI T821 |
| Upper part pressure needle diameter | < unk > (3.5 +/- 0.1) mm (A corrugated), < unk > (3.0 +/- 0.1) mm (C corrugated), < unk > (2.0 +/- 0.1) mm (B corrugated), < unk > (1.0 +/- 0.1) mm (E corrugated) |
| Number of upper pressure needles | 4 (A corrugated), 4 (C corrugated), 6 (B corrugated), 6 (D corrugated) |
| Lower part support needle diameter | < unk > (3.5 +/- 0.1) mm (A corrugated), < unk > (3.0 +/- 0.1) mm (C corrugated), < unk > (2.0 +/- 0.1) mm (B corrugated), < unk > (1.0 +/- 0.1) mm (E corrugated) |
| Number of needles supported in the lower part | 5 (A corrugated), 5 (C corrugated), 7 (B corrugated), 7 (E corrugated) |
| Packaging Dimensions | 275*226*84mm |
| Weight | 1.6kg |
Labo 17074 Cardboard adhesive strength test stand Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.