LABO LB-YC152 Cut Tobacco Filling Value Tester

Introduction

LABO Huike LABO LB-YC152 Cut Tobacco Filling Value Tester The cut tobacco filling value Tester is used to test the filling capacity of shredded cigarettes (including shredded leaves, expanded shredded leaves, thin slices, etc.) Professional level, can completely replace similar imported products.

Features

• High-precision length sensor is adopted, and the sensor resolution is 0.001mm, which is much higher than the requirement of ±0.01mm length accuracy specified in the standard. When the instrument leaves the factory, the repeatability control <0.02mm is better than the standard requirement <0.03mm;

• Adopt precision ball screw drive to ensure stable performance and durability of the instrument;

• The pressure of the measuring head, measuring speed, measuring time, etc. can be set arbitrarily within a certain range, which improves the applicability of the instrument. This function is of great significance to scientific research and testing institutions. The same instrument can easily detect the filling value of shredded tobacco and cut stems, which improves the detection efficiency;

• LCD Chinese display interface operation. The test is automatically completed, the test data is statistically processed and output by a micro-printer, the instrument is connected with an electronic balance, and the sample weight is not limited to 10g, which reduces the influence of human factors on the test results when the sample is weighed. Direct calculations display fill values, detection

• The data is more scientific and the operation is easier;

• The instrument is equipped with a calibration program and is equipped with a standard length gauge block. Users or measurement and calibration departments (third parties) can easily calibrate the length error and repeatability of the instrument.

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.