LABO LB-C48 Cardboard Puncture strength Tester

Introduction

LB-C48 is designed with high-strength steel structure to ensure stability and reliability during impact testing. Fast clamping of the sample, automatic reset of the operating handle, with safety protection device, LCD Chinese display measurement and control system, full computer control technology, open structure, high automation program, simple and convenient operation, safe and reliable.

Standards

GB/T2679.7, ISO3036, ASTM D781, TAPPI T803

Features

Fast clamping of the sample, automatic reset of the operating handle, with safety protection device, LCD Chinese display measurement and control system, full computer control technology, open structure, high automation program, simple and convenient operation, safe and reliable. Fully automatic measurement, intelligent judgment function, the operating system displays the measurement results in real time. Chinese menu display operation interface, statistics and storage of test results, thermal high-speed micro-printer printing, low noise, no ink and ribbon.

Test description

Install a suitable counterweight on the swing arm, and hang the swing arm at the starting position, then close the locking block, lock the locking screw, and put the friction collar on the rear of the piercing head, according to the configuration Select the test gear with a heavy weight, then clamp the sample to be tested between the upper and lower splints, open the locking screw, release the locking block, the pendulum swings, the piercing head passes through the sample, when the pendulum swings back , take advantage of the situation to catch the swing arm with your hand, lift the pendulum, put it back to the position of the locking block, lock the screw, read the measured value on the display screen, and prepare for the next test. Measure the longitudinal front and back of the sample, and the transverse front and back of the 4 measured values to carry out the arithmetic mean. If the result is less than 12J, then the accuracy is to 0.1J; if the result is greater than 12J, the accuracy is to 0.2J. Note: Select the appropriate counterweight weight so that the measurement result is between 20% and 80% of the maximum value. If it is higher or lower than that, you should change gears (select the corresponding weight according to different gears).

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.