Germany Erichsen 295/V Paint film adhesion Cross Hatch Cutter set 11 teeth/1mm

Erichsen 295/V film adhesion Cross Hatch Cutter number of teeth 11, tooth spacing 1mm, suitable for film thickness environment 0~50μm, instrument material stainless steel, handle material plastic, knife head material stainless steel, blade number 2.

Brand

SKU: NB013716

Erichsen

Model

erichsen 295/V

Price

$ 1078.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

Erichsen shopSE

Information

Datasheet RFQ Contract Catalog

What else did others buy

Genuinegoods

Erichsen erichsen 295/V Cross-cut knifeOverview
Specifications
Comments
FAQs

erichsen 295/V

Cross-cut knife

The erichsen295 paint cross-hatch knife meets all cross-hatch test standards. It consists of a plastic handle and a cutter head mounted on it. The cutter head can be adjusted to the most comfortable position for the operator. Different types of cutter heads are available and a tape according to EN ISO 2409 is available.

The erichsen 295 cross-cutting instrument is supplied complete, including a cutter head mounted on a plastic handle. Comes in a sturdy plastic carrying case and also contains a nylon brush and a 2.5x magnifying glass. For the 295/III single-edged blade, a folding rule is also provided. The instrument also comes with manufacturer's certificate M.

Comparison of parameters of Erichsen cross hatcher series

standard	Film thickness	Tool number x spacing (mm)	model	Item number
ISO 2409 EN ISO 2409	up to 60Î¼m 60~120Î¼m 120~250Î¼m	6 x 1	295/I	0019.01.31
		6 x 1	295/II	0019.02.31
		6 x 2	295/II	0019.02.31
		6 x 3	295/III or 295/VII	0019.03.31 (0019.07.31)

ASTM D 3359	up to 50Î¼m 50~125Î¼m	11x1	295/V	0019.05.31
ASTM D 3359	up to 50Î¼m 50~125Î¼m	6x2	295/II	0019.02.31

JIS K 5400 JIS K 6894	up to 60Î¼m 60~120Î¼m Greater than 120Î¼m	11x1	295/V	0019.05.31
		6x2	295/II	0019.02.31
		6x3	295/III or 295/VII	0019.03.31 (0019.07.31)

SNV 37111	up to 60Î¼m Greater than 60Î¼m	8x1	295/III	0019.03.31
SNV 37111	up to 60Î¼m Greater than 60Î¼m	8x2	295/III	0019.03.31

VDA 621-411	up to 60 Î¼m 60~120 Î¼m Greater than 120 Î¼m	6x1	295/I	0019.01.31
		6x2	295/II	0019.02.31
		6x3	295/III	0019.03.31 (0019.07.31)

ECCA ² )	up to 50 Î¼m Greater than 50 Î¼m	11x1	295/V	0019.05.31
ECCA ² )	up to 50 Î¼m Greater than 50 Î¼m	2x5	295/IV	0019.04.31

ISO 2409-1972 BS 3900:E NFT 30-038	Agreement	11x2	295/VI	0019.06

1.After 1994, the European standard ENISO2409 replaced the national standards DIN53151, BS3900: E6, NFT30-38, NEN5337 and SIS184172.

2. After the cross-hatch test, you can also do a deep drawing test (ENISO1520). Deep drawing experiments can be completed with the following instruments:

ERICHSEN cupping Tester, model 200, 202, 202C or 204

Impact test device 304ECCA compliant with ASTM D3359

3. For soft substrates.

4. For hard substrates.

Erichsen erichsen 295/V Cross-cut knifeSpecifications

LIST	VALUE
Number of teeth	11 teeth
Tooth spacing	1mm
Applicable film thickness environment	0~50μm
Instrument material	stainless steel
Handle material	plastic
Cutter head material	stainless steel
number of blades	2

Erichsen erichsen 295/V Cross-cut knife Packing list

Cross Hatch Cutter × 1, Encasement Plastic Box × 1, Nylon Brush × 1, magnifying glass × 1, Manufacturer Certificate × 1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Determination of water-based interior-wall Coating adhesion, is this cross-cutting knife suitable?

[A]

This model is suitable for the determination of water-based inner and outer wall Coating adhesion in architectural coatings. The cross-cut test is mainly carried out with knives, and the firmness of the Coating to the substrate is judged according to the number of squares of the film peeling. Use a sharp blade and a scale steel ruler to cut 11 cuts with a distance of 1mm in the vertical and horizontal directions of the test plate, and the vertical and horizontal cuts intersect into 100 squares. So it is applicable.

[Q]

Is this the cross-cutting knife mentioned in GB/T9286?

[A]

+Erichsen erichsen 295/V Cross-cut knife Big data

+Erichsen erichsen 295/V Cross-cut knifeSimilar products