Erichsen erichsen 295/VII Cross-cut knife

Erichsen 295/VII Cross Hatch Cutter cross-cut Tester 6 teeth

Erichsen 295/VII Cross Hatch Cutter is a Cross Hatch Cutter set with brush, plastic case, magnifying glass, erichsen 295/VII has 6 teeth and 3mm tooth spacing.

Brand

SKU: NB013717

Erichsen

Model

erichsen 295/VII

Get Quote

Erichsen shop

Information

Datasheet Catalog

What else did others buy

TRUIT TR 5006/3 cross-cut plate cross-cut number 6

$ 145.00
QFH cross-cut Tester QFH-A600 JFL Adhesion Tester organic coating adhesion

$ 130.00
TQC SP1695 adjustable cross-cut adhesion instrument handle

$ 1017.00
TRUIT TR 5006/1 coating cross-cut plate cross-cut number 11

$ 145.00
Shanghai PUSHEN 1mm * 6 Tooth Cross Hatch Cutter

$ 148.00

Genuinegoods

Erichsen erichsen 295/VII Cross-cut knifeOverview
Specifications
Comments
FAQs

erichsen 295/VII

Cross-cut knife

The Erichsen295 lacquered scratch cutter meets all mark test criteria. It consists of a plastic handle and a cutter head mounted on it, which can be adjusted to the most comfortable position for the operator. Different types of bits are available, and an EN ISO 2409 compliant tape is available.

The Erichsen295 scratching instrument is supplied in a complete range of products, including a cutter head mounted on a plastic handle. It comes in a sturdy plastic carrying case, and also contains a nylon brush and a 2.5x magnifying glass. For the 295/III single-edged bits, a folding ruler is also available. The instrument also comes with a manufacturer's certificate M.

Comparison of the parameters of the Erichsen griddle series

standard	Film thickness	Knife size x spacing(mm)	Model	Catalog number
ISO 2409 EN ISO 2409	Up to 60 μm 60~120μm 120~250μm	6 x 1	295/I	0019.01.31
		6 x 1	295/II	0019.02.31
		6 x 2	295/II	0019.02.31
		6 x 3	295/III or 295/VII	0019.03.31 (0019.07.31)

ASTM D 3359	Up to 50 μm 50~125μm	11x1	295/V	0019.05.31
ASTM D 3359	Up to 50 μm 50~125μm	6x2	295/II	0019.02.31

JIS K 5400 JIS K 6894	Up to 60 μm 60~120μm >120 μm	11x1	295/V	0019.05.31
		6x2	295/II	0019.02.31
		6x3	295/III or 295/VII	0019.03.31 (0019.07.31)

SNV 37111	Up to 60 μm >60 μm	8x1	295/III	0019.03.31
SNV 37111	Up to 60 μm >60 μm	8x2	295/III	0019.03.31

VDA 621-411	Up to 60μm 60~120μm Greater than 120μm	6x1	295/I	0019.01.31
		6x2	295/II	0019.02.31
		6x3	295/III	0019.03.31 (0019.07.31)

ECCA²)	Up to 50μm Greater than 50μm	11x1	295/V	0019.05.31
ECCA²)	Up to 50μm Greater than 50μm	2x5	295/IV	0019.04.31

ISO 2409-1972 BS 3900:E NFT 30-038	Conventions	11x2	295/VI	0019.06

1. After 1994, the European standard ENISO2409 replaced the national standard DIN53151, BS3900:E6, NFT30-38, NEN5337 and SIS184172.

2. After the scratch test, you can also do a deep drawing test (ENISO1520). Deep drawing experiments can be performed with the following instruments:

ERICHSEN CUP-CONVEX TESTER, MODEL 200, 202, 202C OR 204

Complies with ASTMD3359 impact test set 304ECCA

3. on soft substrates.

4. on hard substrates.

Erichsen erichsen 295/VII Cross-cut knifeSpecifications

LIST	VALUE
Number of teeth	6 teeth
Tooth spacing	3mm
Applicable film thickness environment	0~50μm
Instrument material	stainless steel
Handle material	plastic
Cutter head material	stainless steel

Erichsen erichsen 295/VII Cross-cut knife Packing list

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.