Erichsen343 Zahn Portable 4 Viscosity Cup ASTM D 4212/4.3 mm
Viscosity range 200~1200cSt, flow hole diameter 4.3mm, capacity 100ml, cup body material aluminum alloy, filter material stainless steel, handle material aluminum alloy, Applicable standard ASTM D4212.
Erichsen
erichsen343 No.4
-
TQC VF2197 Afnor Viscosity Cup flow hole 6mm
$ 399.00 -
TQC VF2229 Zahn Cup No. 4 Zahn Viscosity Cup /4.3mm
$ 439.00 -
TRUIT TR 1009 Iwata Cup NK-2 Cup, Copper Nickel Plated Material
$ 96.00 -
TQC VF2049 Coating Viscosity Cup ISO Flow Cup No. 4 with VF2061 bracket
$ 800.00 -
MODERNER CNDB-4 Zahn Viscosity Cup (zahn cup) 4.3mm portable Zahn cup
Login
German Erichsen343 Viscosity Cup test principle:
The viscosity of a substance is expressed as the time it takes for a certain volume of measured liquid (usually 100 ml) to flow out of a cup with a specified spout diameter. The flow time is measured by means of a stopwatch.
Test Method:
Test procedure: Immerse the cup in its entirety into the substance to be measured and fill the cup completely. Then quickly lift the cup while pressing the stopwatch. The time it takes for the contents of the cup to completely drain is measured in seconds, and the time recorded at the moment when the spout is visible from top to bottom is the time at the end point. Care needs to be taken to keep the cups vertical during the test.
Erichsen343 Viscosity Cup Ordering Information:
Model 343 (Zahn Immersion Viscosity Cup per ASTM D 4212) | |||
Order number | Spout diameter | Viscosity range *) | material |
0049.01.32 | No. 1 | 5 ~ 60 mm2/s | Aluminum alloy |
0049.02.32 | No. 2 | 20 ~ 250 mm2/s | Aluminum alloy |
0049.03.32 | No. 3 | 100 ~ 800 mm2/s | Aluminum alloy |
0049.04.32 | No. 4 | 200 ~ 1,200 mm2/s | Aluminum alloy |
0049.05.32 | No. 5 | 400 ~ 1,800 mm2/s | Aluminum alloy |
Erichsen erichsen343 No.4 Viscosity CupSpecifications
| LIST | VALUE |
|---|---|
| Viscosity range | 200~1200cSt |
| flow hole diameter | 4.3mm |
| Capacity | 100ml |
| Cup body material | aluminum alloy |
| Filter material | stainless steel |
| Handle material | aluminum alloy |
| Applicable standard | ASTM D4212 |
Erichsen erichsen343 No.4 Viscosity Cup Packing list
Viscosity cup × 1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Introduction to the use and application of No. 4 viscosity cup
- Decryption paints original juice viscosity cup, principle, application and selection
- Principle, application and selection of ZAHN5 viscosity cup