Erichsen 295/VI film adhesion Cross Hatch Cutter cross-cut Tester 11 teeth
Erichsen 295/VI film adhesion Cross Hatch Cutter is an 11-tooth Cross Hatch Cutter set that meets ISO and BS standards. The teeth of the erichsen 295/VI cross-cut Tester are made of high-grade wear-resistant stainless steel, which has good abrasion resistance.
Erichsen
erichsen 295/VI
-
PUSHEN HGQ 2mm single-edged paint film cross-cut instrument, standard with 2 2mm single-edged cutter heads, 11 teeth
$ 179.00 -
MODERNER QFH 3mm (5 slots) Cross Hatch Cutter film coating adhesion test
Login -
TRUIT TR 5001/4 Single Sided Cross Hatch Cutter 2mm/6 Tooth
$ 145.00 -
PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers
$ 179.00 -
Shanghai PUSHEN 2mm multi-blade cross-cut cutter head
$ 148.00
The Erichsen295 lacquered scratch cutter meets all mark test criteria. It consists of a plastic handle and a cutter head mounted on it, which can be adjusted to the most comfortable position for the operator. Different types of bits are available, and an EN ISO 2409 compliant tape is available.
The Erichsen295 scratching instrument is supplied in a complete range of products, including a cutter head mounted on a plastic handle. It comes in a sturdy plastic carrying case, and also contains a nylon brush and a 2.5x magnifying glass. For the 295/III single-edged bits, a folding ruler is also available. The instrument also comes with a manufacturer's certificate M.
Comparison of the parameters of the Erichsen griddle series
standard | Film thickness | Knife size x spacing(mm) | Model | Catalog number |
ISO 2409 EN ISO 2409 | Up to 60 μm 60~120μm 120~250μm | 6 x 1 | 295/I | 0019.01.31 |
6 x 1 | 295/II | 0019.02.31 | ||
6 x 2 | 295/II | 0019.02.31 | ||
6 x 3 | 295/III or 295/VII | 0019.03.31 (0019.07.31) | ||
ASTM D 3359 | Up to 50 μm 50~125μm | 11x1 | 295/V | 0019.05.31 |
6x2 | 295/II | 0019.02.31 | ||
JIS K 5400 JIS K 6894 | Up to 60 μm 60~120μm >120 μm | 11x1 | 295/V | 0019.05.31 |
6x2 | 295/II | 0019.02.31 | ||
6x3 | 295/III or 295/VII | 0019.03.31 | ||
SNV 37111 | Up to 60 μm >60 μm | 8x1 | 295/III | 0019.03.31 |
8x2 | 295/III | 0019.03.31 | ||
VDA 621-411 | Up to 60μm 60~120μm Greater than 120μm | 6x1 | 295/I | 0019.01.31 |
6x2 | 295/II | 0019.02.31 | ||
6x3 | 295/III | 0019.03.31 | ||
ECCA2) | Up to 50μm Greater than 50μm | 11x1 | 295/V | 0019.05.31 |
2x5 | 295/IV | 0019.04.31 | ||
ISO 2409-1972 BS 3900:E NFT 30-038 | Conventions | 11x2 | 295/VI | 0019.06 |
1. After 1994, the European standard ENISO2409 replaced the national standard DIN53151, BS3900:E6, NFT30-38, NEN5337 and SIS184172.
2. After the scratch test, you can also do a deep drawing test (ENISO1520). Deep drawing experiments can be performed with the following instruments:
ERICHSEN CUP-CONVEX TESTER, MODEL 200, 202, 202C OR 204
Complies with ASTMD3359 impact test set 304ECCA
3. on soft substrates.
4. on hard substrates.
Erichsen erichsen 295/VI Cross-cut knifeSpecifications
| LIST | VALUE |
|---|---|
| Number of teeth | 11 teeth |
| Tooth spacing | 2mm |
| Instrument material | stainless steel |
| Handle material | plastic |
| Cutter head material | stainless steel |
Erichsen erichsen 295/VI Cross-cut knife Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
