Erichsen 295/IV adhesion Cross Hatch Cutter
Germany Erichsen 295/IV adhesion Cross Hatch Cutter is a cross-cut knife set, erichsen 295/IV has 2 teeth and a spacing of 5mm, used for paints, paint film adhesion testing.
Erichsen
erichsen 295/IV
-
QFH Cross Hatch Cutter 1/2/3 mm Tooth QFH Cross Hatch Cutter 6 Tooth
$ 190.00 -
TRUIT TR 5006A Multifunctional cross-cut board cross-cut 7, 11
$ 135.00 -
TQC VF2358 cross-cut blade 6 teeth 3mm for CC1000 series
$ 842.00 -
TRUIT TR 5006/2 adhesion cross-cut plate cross-cut number 11
$ 148.00 -
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads
$ 132.00
The Erichsen295 lacquered scratch cutter meets all mark test criteria. It consists of a plastic handle and a cutter head mounted on it, which can be adjusted to the most comfortable position for the operator. Different types of bits are available, and an EN ISO 2409 compliant tape is available.
The Erichsen295 scratching instrument is supplied in a complete range of products, including a cutter head mounted on a plastic handle. It comes in a sturdy plastic carrying case, and also contains a nylon brush and a 2.5x magnifying glass. For the 295/III single-edged bits, a folding ruler is also available. The instrument also comes with a manufacturer's certificate M.
Comparison of the parameters of the Erichsen griddle series
standard | Film thickness | Knife size x spacing(mm) | Model | Catalog number |
ISO 2409 EN ISO 2409 | Up to 60 μm 60~120μm 120~250μm | 6 x 1 | 295/I | 0019.01.31 |
6 x 1 | 295/II | 0019.02.31 | ||
6 x 2 | 295/II | 0019.02.31 | ||
6 x 3 | 295/III or 295/VII | 0019.03.31 (0019.07.31) | ||
ASTM D 3359 | Up to 50 μm 50~125μm | 11x1 | 295/V | 0019.05.31 |
6x2 | 295/II | 0019.02.31 | ||
JIS K 5400 JIS K 6894 | Up to 60 μm 60~120μm >120 μm | 11x1 | 295/V | 0019.05.31 |
6x2 | 295/II | 0019.02.31 | ||
6x3 | 295/III or 295/VII | 0019.03.31 | ||
SNV 37111 | Up to 60 μm >60 μm | 8x1 | 295/III | 0019.03.31 |
8x2 | 295/III | 0019.03.31 | ||
VDA 621-411 | Up to 60μm 60~120μm Greater than 120μm | 6x1 | 295/I | 0019.01.31 |
6x2 | 295/II | 0019.02.31 | ||
6x3 | 295/III | 0019.03.31 | ||
ECCA2) | Up to 50μm Greater than 50μm | 11x1 | 295/V | 0019.05.31 |
2x5 | 295/IV | 0019.04.31 | ||
ISO 2409-1972 BS 3900:E NFT 30-038 | Conventions | 11x2 | 295/VI | 0019.06 |
1. After 1994, the European standard ENISO2409 replaced the national standard DIN53151, BS3900:E6, NFT30-38, NEN5337 and SIS184172.
2. After the scratch test, you can also do a deep drawing test (ENISO1520). Deep drawing experiments can be performed with the following instruments:
ERICHSEN CUP-CONVEX TESTER, MODEL 200, 202, 202C OR 204
Complies with ASTMD3359 impact test set 304ECCA
3. on soft substrates.
4. on hard substrates.
Erichsen erichsen 295/IV Cross-cut knifeSpecifications
| LIST | VALUE |
|---|---|
| Number of teeth | 2 teeth |
| Tooth spacing | 5mm |
| Instrument material | stainless steel |
| Handle material | plastic |
| Cutter head material | stainless steel |
Erichsen erichsen 295/IV Cross-cut knife Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.