HLX-J Hypertherm Spiral Force Gauge Test Rack

Introduction

Haibao Instruments HLX-J Helical Tension and Compression Test Stand is a special tensile test bench suitable for domestic (CN) and foreign push-pull dynamometers, with a rated load of 500N and a test stroke range of 0~200mm. HLX-J spiral tension and compression test frame has the characteristics of stable operation, simple operation, convenient mobile installation, vertical and horizontal dual-purpose, etc.

Applications

HLX-J spiral tension and compression test stand is suitable for all walks of life and scientific research institutions for tension and compression load, insertion force, destruction test, etc.

Test Methods

HLX-J spiral tension and compression test frame can carry out tests in two directions of tension and compression. According to the characteristics of the product to be tested, place it at a suitable position on the workbench. Rotate the handwheel on the workbench, and the meter will move up and down smoothly to complete the test work.

Maintenance

1. Pay attention to keep all parts of the workbench clean.

2. When you feel that the movement of the workbench is sluggish and inflexible, please add a little oil to lubricate the joint between the guide rail and the guide sleeve (there is an oil storage tank on the copper guide sleeve).

Pictures

bracket x1, manual x1, certificate of conformity (warranty card) x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.