ZEHNTNER ZCY 2400 Bending Tester
ZCY 2400 round axis Bending Tester uses a single axis to check the quality of the work, or replaces different axes from coarse to fine, and evaluates at what diameter, the surface of the sample begins to be damaged? To judge the adhesion, resilience, ductility of the paint film, Gloss treatment... etc
Zehntner By Proceq
ZCY 2400
-
JINGKELIAN QTY-10A cylindrical mandrel bending Tester, eight different diameters cylindrical mandrel
$ 220.00 -
JINGKELIAN QTY-32 cylindrical mandrel bending Tester to determine the ability of the paint film to deform with the substrate without damage
$ 270.00 -
JFL QTZ paint film cone bending test
$ 276.00 -
QTY-32 Lacquer film cylindrical Bending Tester YONGLIDA maximum shaft rod diameter 32mm
$ 245.00 -
PUSHEN ZQ-V Conical Mandrel Bending Tester
$ 646.00
Zehntner By Proceq ZCY 2400 Bending TesterSpecifications
| LIST | VALUE |
|---|---|
| Meet the standard | EN ISO 1519, ASTM D522 |
Zehntner By Proceq ZCY 2400 Bending Tester Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Working principle and application analysis of platings Bending Tester
- Detection method of cylindrical shaft bending Tester
- Test application of T-type Bending Tester on composite silane film
- Use of conical mandrel bending Tester
- ActiveJB/T 3078-2015
- ActiveISO FDIS 1519-2010
- ActiveNF
- Active 2099-2013
- ActiveDIN EN ISO 1519-2003
- ActiveNF EN ISO 1519-2002
- ActiveGB/T 9989.4-2015
- ActiveISO 1519-2011
- ActiveASTM D522/D522M-2021
- ActiveGB/T 6742-2007