Pointer Shore Durometer LX-D Hypertherm Type D Shore Durometer High Hardness Pointer

Introduction

Haibao Instruments LX-D Pointer Shore Hardness Tester is a D-type Shore Hardness Tester with a large pressure range. The measured hardness value is displayed by the rotation of the pointer on the dial. LX-D Dial-Type Shore Hardness Tester is strictly designed and produced by Haibao according to GB/T531-99, GB2411-80, HG/T2489-93, JJG304-2003 and other standards, mainly used for some high hardness materials Hardness test experiment.

LX-D pointer Shore Hardness Tester has the advantages of convenient portability, good stability, simple structure and accurate measurement.

Applications

LX-D Pointer Shore Hardness Tester is suitable for microporous materials made of rubber and plastic, plastic containing foaming agent, etc., mainly for materials with high hardness.

Note: When using Type A Shore Hardness Tester to measure a value exceeding 90 degrees, it is recommended to use LX-D pointer Shore Hardness Tester (D type).

Product Standards

LX-D Pointer Shore Hardness Tester complies with standards DiN 53505, ASTMD2240, 1S0/R868, JISR7215.

Pictures

Zeroing Instructions

When pressing the LX-D pointer Shore Hardness Tester on the glass to check the zero position or adjusting the zero position on the fixed load measuring stand, it is necessary to place a hard special gauge block under the foot of the pointer Shore Hardness Tester , otherwise , the indenter of the Hardness Tester will damage the glass plate, and it is difficult to display the value accurately. For the specific operation method, please refer to the instruction manual of the special gauge block.

Hardness gauge x1, certificate x1, warranty card x1, manual x1, instrument case x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.