Ford4 cup, immersion and laboratory standard imported ford cup, filter aperture 4.1mm

The brand name of the Ford No.4 cup is TQC in the Netherlands, and here we offer two different shapes that can be used interchangeablyThe Ford No. 4 cup, one is portable (immersive) and the other is tabletop, and the basic parameters of both are the same. Both can be used on the construction site and in the laboratory, but the measurement convenience of the former is more used for testing on the go during the production process, and the latter is often used more in the laboratory because it needs to be equipped with a stand.

2 paragraphsWhy the Ford No. 4 cup can be used interchangeably

1. The diameter of the filter is 4.1mm;

2. All are produced and designed according to ASTM D1200 standard, and the materials are all aluminum alloy;

3. The measured viscosity range is 70~370cst;

4. The measured flow time range is 30~100s.

Therefore, in general, the two can be used interchangeably.

2 paragraphsFord No. 4 cup profile contrast

Application of the Ford Cup

The Ford No. 4 cup is primarily suitable for the rapid determination of viscosity values of products that conform to or are close to Newtonian mechanical properties, such as paints, paints, pigments. It is suitable for paints, coatings and other industries.

Ford No. 4 Cup

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.