General TDSscan10H-K Pen TDS Meter
Suitable for measurement of total dissolved solids (TDS) value of high concentration liquids such as wastewater and mineral salts, measurement accuracy: 1% F.S.
Bante
TDSscan10H-K
-
JINGQI WD9102P Total Phosphorus Tester with Printing Function
$ 1305.00 -
LEICI copper ion electrode calibrating solution, suitable for copper ion composite electrode
$ 106.00 -
HANNA HI70080P TDS calibrating solution 800 mg/L (ppm) /20ml/bag (25 bags/box)
$ 141.00 -
JINGQI WD8214 Lead Tester
$ 481.00 -
DDKSIC TEMP-01 Temperature electrode BNC (Q6) conventional aqueous solution
$ 101.00
Introduction
TDSscan10H pen-type TDS meter is a high-range pen-type TDS meter, which is suitable for measuring the total dissolved solids (TDS) value of high-concentration liquids such as wastewater and mineral salts. The measurement accuracy is 1% FS.
Features
• High range pen type TDS meter with platinum electrode sensor.
• 1-point key calibration, user-defined calibration solution can be used.
• Adjustable TDS conversion factor to ensure accurate measurement of different water qualities.
• Automatic temperature compensation to ensure accurate measurement over the full range.
• Key data lock, immediately retain the current display value.
• Automatic power off, effectively saving battery power consumption.
• Replaceable electrodes reduce instrument use and maintenance costs.
• Fully waterproof features, to ensure the complete protection of the instrument in harsh environments.
Application
• Water and wastewater treatment
• Electroplating and printing industry
• Aquaculture and hydroponics
• Aquarium and other industrial applications
Bante TDSscan10H-K Pen TDS meterSpecifications
| LIST | VALUE |
|---|---|
| Measuring range | 0.05~10.00ppt |
| Accuracy | ±1%FS |
| resolution | 0.01ppt |
| Calibrated point | 1 point |
| Calibrating fluid | 7447ppm |
| Temperature compensation range | 0~50 ℃, automatic |
| TDS conversion factor | 0.4~ 1.0 (default 0.5) |
| Standardized temperature | 25℃ |
| shutdown mode | Manual or automatic (after 8 minutes of no button operation) |
| Sensors Type | ECSCAN-C1-100K型 |
| Connector | 6-Pin |
| Environment temperature | 0~60℃,32~140°F |
| Power | G13A button battery 3 pcs |
| Battery life | About 150 hours |
| Dimensions | 185 * F40mm |
| Instrument Weight | 100g |
| Optional accessories | TDS standard solution, ECscan-C1-100K type Conductivity Detector electrode |
| Packaging Dimensions | 280*230*80mm |
| Encasement Weight | 1.5kg |
Bante TDSscan10H-K Pen TDS meter Packing list
Host X1, TDS standard liquid (7447ppm) X1, G13A button battery X1, plastic carrying case X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.