Bante930-UK Laboratory pH Meter

Bante930 Precision LABOratory pH/Ion Meter

Precision laboratory pH Ion Meter, 5-point key calibration, 9 functional parameters are optional, the meter can be connected with various ion selective electrodes, suitable for measuring pH, redox potential and ion concentration of liquids, measurement accuracy: 0.002pH .

pH Mode Features

• Precision laboratory pH Ion Meter with large backlit LCD display.

• 1 to 5 point key calibration, automatic identification of pH standard buffer.

• Optional pH buffer standard (USA/NIST/DIN) or 2-point custom calibration.

• Automatic electrode slope display, prompting the user whether to replace the pH electrode.

Precision pH Ion Meter

Functional characteristics of ORP mode

• 1-point offset calibration, allowing adjustment of displayed values to known standards.

• Relative and absolute mV modes provide accurate ORP readings.

Ion Mode Features

• 2 to 5-point key calibration, including 8 optional concentration calibration points.

• Automatic identification of ion-selective electrodes without specifying ion types.

• Directly read the ion concentration value, avoiding cumbersome conversion and calculation.

• Optional concentration units (ppm, mg/L, mol/L) to meet various ion measurement needs.

Precision pH Ion Meter

common features

• Automatic temperature compensation to ensure accurate measurement over the full range.

• Automatic Calibration Reminder to remind users to calibrate the meter on a regular basis.

• Automatic end point locking, retaining stable measurement values for easy viewing and recording.

• Automatic electrode diagnosis, you can check the zero offset, electrode range and slope value.

• The system menu can customize 10 functional parameters such as the number of calibration points, display resolution, ion concentration unit, stability standard, data lock mode, and automatic shutdown mode.

• One key reset (Reset), automatically restore the meter to the factory default settings.

• Expanded memory can store up to 500 sets of measurement data.

• The built-in clock automatically marks the date and time of stored data to comply with GLP regulations.

• USB communication interface to send stored data to PC.

Host X1, P11 pH electrode (made in the UK) X1, TP-10K temperature probe X1, pH standard buffer reagent (pH4.01/7.00/10.01) X1, USB cable X1, DC5V power adapter X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.