BANTE A130-UK Laboratory pH Meter Acid alkalinity Detector

A130 Professional LABOratory pH/Ion Meter

Professional laboratory pH Ion Meter, optional 5 ion measurement methods, 1000 sets of data storage, system menu contains 20 optional parameters, measurement accuracy: 0.002pH.

pH mode features:

• Professional laboratory pH Ion Meter with 7-inch TFT display.

• Optional pH buffer standard (USA/NIST/DIN) or 5-point custom calibration.

• Automatic electrode diagnosis, with electrode slope and offset display.

• Automatic temperature compensation to ensure accurate measurement over the full range.

• Solution Temperature Coefficient (STC), compensates for pure water measurements and converts readings to 25°C.

• Alarm limit, automatically warns if the measured value exceeds the set range.

pH Ion Meter

ORP mode features:

• 1-point offset calibration, allowing adjustment of displayed values to known standards.

• Relative and absolute mV modes provide accurate ORP readings.

Ion mode features:

• Optional ion measurement methods, including direct reading method, known addition method, known subtraction method, sample addition method and sample subtraction method.

• Optional concentration units, including ppm, mg/L, mol/L, mmol/L.

• 2 to 5-point key calibration, including 8 optional concentration calibration points.

• Automatic identification of ion-selective electrodes without specifying ion types.

• Electrode management can store the slope of 3 ion electrodes and recall the calibration data of each electrode.

• Calibration report provides calibration standards and electrode slope details.

pH Ion Meter

Water hardness mode features:

• 2 to 5 point key calibration from low to high concentration.

• Optional water hardness units, including German degrees, British degrees, French degrees, mmol/L and mg/L.

General features:

• Calibration due reminder to remind users to calibrate the meter regularly.

• Automatic end point locking, retaining stable measurement values for easy viewing and recording.

• Interval reading mode, regularly send measured values to PC or printer.

• Password protection to prevent unauthorized calibration and settings.

• Expanded memory can store up to 1000 sets of data.

• USB communication interface is easy to connect external devices.

• One key reset (Reset) automatically restores the instrument to the factory default settings.

Host X1, P11 pH electrode (made in the UK) X1, TP-10K temperature probe X1, pH standard buffer reagent (pH4.01/7.00/10.01) X1, DC12V power adapter X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.