Bante900-UK laboratory multiparameter Water Quality Meter

Bante900 multi-parameter Water Quality Analyzer

Multi-parameter laboratory TDS meter with built-in system menu, 15 functional parameters to choose from, the instrument is suitable for measuring pH, redox potential, ion concentration, conductivity, total dissolved solids (TDS), salinity, resistivity, dissolved oxygen concentration and saturation of liquids.

pH Mode Features

• Multi-parameter Water Quality Analyzer with large backlit LCD screen.

• 1 to 5 point push-button calibration for automatic recognition of pH standard buffers.

• Optional pH buffer standard (USA/NIST/DIN) or 2-point custom calibration.

• Automatic electrode slope display to prompt the user whether to change the pH electrode.

ORP mode features:

• 1-point offset calibration that allows adjustment of the display value to a known standard.

• Relative and absolute mV modes provide accurate ORP readings.

Ion Mode Features

• 2 to 5 pushbutton calibration, including 8 concentration calibration points.

• Automatic identification of ion-selective electrodes without the need to specify the ion type.

• Direct reading of ion concentration values to avoid tedious conversions and calculations.

• Concentration units (ppm, mg/L, mol/L) are available to meet a variety of ion measurement needs.

TDS meter

Conductivity/TDS/Salinity/Resistivity Mode Features

• 1 to 5 point key calibration for automatic identification of conductivity standards.

• Selectable cell constant (K=0.1/1/10), TDS conversion factor, normalized temperature (20 or 25°C), linear and pure water temperature compensation,

  Seawater and practical salinity measurement mode.

Dissolved Oxygen Mode Features

• 1 or 2 button calibration, using air saturated water or zero oxygen solution.

• Salinity and atmospheric pressure compensation to improve the measurement accuracy of the instrument.

General features:

• Automatic temperature compensation for accurate measurements over the full scale.

• Automatic calibration reminder to remind the user to calibrate the meter regularly.

• Automatic endpoint locking, stable measured values are retained for easy browsing and recording.

• Automatic electrode diagnostics with zero offset, electrode slope, range and conductivity K values.

• The system menu can customize 15 functional parameters such as the number of calibration points, stability standard, data lock mode, automatic shutdown, etc.

• One-key Reset automatically restores the meter to factory default settings.

• Extended memory for up to 500 sets of measurement data.

• Built-in clock automatically marks the date and time of stored data to comply with GLP specifications.

• USB communication interface to send stored data to a personal computer.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.