XINRUI WGZ-200C turbidity water quality automatic analyzer
XINRUI WGZ-200C is a turbidity water quality automatic analyzer with a minimum indication of 0.01 for sample introduction. The WGZ-200C turbidity water quality automatic analyzer has a reliable positioning structure and a high-precision optical path system.
XinRui
WGZ-200C
-
Qiwei L-612 Portable Chlorine Dioxide Tester
$ 253.00 -
DDKSIC DO01-2M-H Polarographic dissolved Oxygen electrode for environmental protection, water treatment, aquaculture, monitoring oxygen content in water
$ 164.00 -
LEICI JPSJ-605F Dissolved Oxygen Meter +/- 0.30mg/L
$ 739.00 -
LEICI CO-571 Chemical Oxygen Demand Tester
$ 1997.00 -
JINGQI WD8801 residual chlorine analyzer
$ 481.00
Overview of uses
XinRay WGZ-200C Turbidity Water Quality Analyzer is used to measure the degree of light scattering generated by insoluble particulate matter suspended in water or transparent liquids online, and to quantitatively characterize the content of these suspended particulate matter. It can be widely used in on-site online turbidity measurement of power plants, pure water plants, water plants, domestic (CN) sewage treatment plants, beverage plants, environmental protection departments, industrial water, wine industry and industries, departments, and other departments.
Features
Streamlined design, simple operation and high cost performance, using low drift, high-precision circuit system, can be matched with remote display extension
Reliable positioning structure and high-precision optical path system, fast response, accurate measurement, effective color compensation, direct reading turbidity value
It is equipped with a steady flow defoaming device, a high-intensity and long-life light source, a self-test function, and a 4 ~ 20 mA signal output interface
Wide range, stable and reliable; Simple calibration, ABS plastic split wall-mounted, simple installation and maintenance, the instrument can work stably for a long time
XinRui WGZ-200C Turbidity water quality automatic analyzerSpecifications
| LIST | VALUE |
|---|---|
| Sample introduction method | Water collection method |
| Resolution | 0.01 |
| NTU Measurement range | 0~20, 0~200 (single channel) |
| Linearity | ±2％FS |
| Flow rate of water sample | 400~1000ml/min |
| inlet pressure | 0.05 ~ 0.2 MPa |
| Adapt to temperature | 4~40℃ |
| Output signal | 4~ 20 mA (optional 0~10 mA) Load 100~500Ω |
XinRui WGZ-200C Turbidity water quality automatic analyzer Packing list
Host X1, monitor X1, Sensors X1, steady flow defoamer X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.