Cross-cut instrument 11 teeth 1.5mm special cross-cut instrument, single knife or set optional
The TQC cross-cut instrument is a CC2000 series cross-cut instrument with swirl/spin handle for adjustable pressure and head Hardness up to HRC85 +/- 2. The SP1664 and SP1700 Cross Hatch Cutter are single cross-cut instruments and Cross Hatch Cutter sets respectively.
TQC sheen
-
TRUIT TR 5001/1 adhesion Cross Hatch Cutter 1mm/6 teeth
$ 145.00 -
TRUIT TR 5001/5 Single Face Cross Hatch Cutter 3mm/6 Teeth
$ 145.00 -
TQC SP1695 adjustable cross-cut adhesion instrument handle
$ 1017.00 -
MODERNER QFH 3mm (5 slots) Cross Hatch Cutter film coating adhesion test
Login -
MODERNER QFH 1mm (10 slots) Cross Hatch Cutter 11 blade 1mm pitch
Login
This 11-tooth/1.5mm tooth spacing cross-hatch is two models of the CC2000 series, SP1664 and SP1700. The difference between the two models is that the SP1664 is a single cross-hatch, while the SP1700 model is a cross-hatch set. Both comply with ASTN3359 standards, and the applicable substrate environment is 50~125 micron solid substrates. What is more distinctive is that the connecting part of the handle and the cutter head of the cross-cutting instrument can be rotated to adjust the instability caused by manual cross-cutting pressure and achieve better test results.
TQC sheen CC2000 Cross-cut instrumentSpecifications
| LIST | VALUE |
|---|---|
| Number of teeth | 11 teeth |
| Tooth spacing | 1.5mm |
| Application standard | ASTN3359 |
TQC sheen CC2000 Cross-cut instrument Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
