HYLOLOGY HY-100 (C) Powder Vibration Density Meter, True Density of Powder Particles

Introduction

Powder density refers to the mass corresponding to a unit volume of powder. Due to the gaps (or pores) between the particles or inside the particles in the powder, the density of the powder is usually less than the true density of the corresponding substance. . The tap density refers to the density of the powder contained in the container after being tapped under specified conditions.

HY-100C powder density Tester is a powder density Tester independently developed and manufactured according to the national standard GB/T 5162-2006/ISO3953:1993 (determination of metal powder tap density) and with reference to the United States Pharmacopoeia, with independent intellectual property rights . The instrument covers all indicators in the national standard GB/T 5162-2006/ISO3953:1993.

Features

HY-100(C) Powder Density Tester is composed of adjustable speed motor, vibrating components, microcomputer and micro printer. The amplitude and frequency of vibration can be set by yourself. During the vibration process, the vibrating component rotates at a small angle to ensure that the material is even. It also automatically calculates and prints the test results, and can test three samples at the same time.

Host X1, vibration component X2, gasket X9, measuringflask X9, vibration damping pad X18, power cord X1, fuse X5, testtube brush X1, silicone pad X6, warranty card X1, manual X1, certificate X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.