SMTMF MHBS-3000AT Touch screen automatic turret digital display Brinell Hardness Tester

Introduction

Brinell Hardness Testers are mainly used to measure the Brinell hardness of materials. Brinell measurement is mainly used to measure castings or forgings with a crystalline structure that cannot be tested using Rockwell and Vickers measurements. For this reason, Brinell testing is mainly used on large materials. By using different forces and changing different indenters, Brinell tests can be applied to almost all metal materials.

Brinell testing is widely used in product acceptance and other industrial applications. However, if the Brinell test is performed only on one part of a large material, the measured value is not representative of the overall properties of the material as a whole or the final product.

Brinell Hardness Tester. It is suitable for Brinell hardness determination of ferrous metals and non-ferrous metals. The machine adopts electronic automatic loading, computer software programming, high-magnification optical measurement, photoelectric sensing and other systems, which are fed back by high-precision pressure sensors, controlled by CPU and can automatically compensate for the test force lost in the test. The hardness value can be automatically calculated and displayed on the LCD screen, with accurate reading and easy operation.

Features

●Force sensor, force feedback, closed-loop system

●Force range: 62.5kgf~3000kgf

●Automatic switching between probe and objective lens

●The operation is simple, and the high-precision reading microscope measurement is accurate and high

●The data of each operation process and test results can be displayed on the screen

●The data of the experimental results can be output by the printer

●The video measuring device and CCD image automatic measurement system can be configured according to the special needs of users

Scope of application

It is mainly used for the hardness determination of cast iron, steel, non-ferrous metals and soft alloys, and can also be used for the determination of the hardness of some non-metallic materials such as hard plastics and bakelites.

Whole machine X1, 20X micrometer eyepiece X1, standard Hardness block X3, fuse 2AX3, power cord X1, carbide ball indenter X3, large test bench X1, medium test bench X1, V-shaped test bench X1, manual X2, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.