SMTMF HD9-45 Optical inspection Lovey Hardness Tester Grade 7 Test Force

Introduction

The HD9-45 optical Lowe Hardness Tester has 7 levels of test force, and two test methods are available for users to choose. It can meet the hardness test of Rockwell and Vickers on the surface

Function introduction

●The conversion of the test force of the Hardness Tester adopts a semi-automatic device, and the speed of applying the test force is controlled by the flow rate of the buffer

●The Rockwell hardness indication value on the surface is directly read by the optical projection screen

●The Vickers hardness indication is measured by a microscope device (measured in two directions perpendicular to each other) and is obtained by looking up the arithmetic mean of the scale

●This instrument has high sensitivity, stability, strong operability, and is widely used in workshops and laboratories

Machine X, metal Vickers Hardness comparison table X1, indenter X3, Hardness block X7, weight X1 (set), No. 0 small weight X1, inner lighting shade X1, fuse 0.5A (specification < unk > 5 * 20) X2, Microscope seat X1, instrument bulb 6V/15FX2, test bench X5, test bench X1, test bench X6, objective lens X2, 15x micrometer eyepiece X1, power cord X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.