LUKE LK100 Ultrasonic Thickness Gauge Measurement range: 0.8~ 300mm (steel)
LUKE LK100 Ultrasonic Thickness Gauge uses new high-performance, low-power microprocessor technology to measure the thickness of metals and other materials, and can measure the ultrasonic Speed of sound of materials. Measurement range of the LK100 Ultrasonic Thickness Gauge is 0.8~ 300mm.
LUKE
LK100
-
Steel plate Ultrasonic Thickness Gauge DC-3000C, penetration coating measurement material Film thickness
$ 1302.00 -
AMITTARI AT-140B high-precision Ultrasonic Thickness Gauge resolution 0.01 Measurement range 1-300mm
$ 459.00 -
Ultrasonic wall Thickness Gauge DC-2030C Deguang electronic measurement of cast iron and other Film thickness
$ 929.00 -
Ultrasonic Film thickness Measurement Instrument DC-2020C Deguang Electronics, Film thickness measurement of metal, plate, pipeline, etc
$ 1053.00 -
SMART SENSOR AS850 Ultrasonic Thickness Gauge measurement range 1.2-225 mm
$ 168.00
Introduction
This instrument is an intelligent ultrasonic Thickness Gauge based on the ultrasonic measurement principle, using the new high-performance, low-power microprocessor technology, which can measure the thickness of metals and other materials, and can measure the ultrasonic sound velocity of materials. In addition, the instrument can monitor various pipes and pressure vessels in production equipment, monitor their degree of thinning after corrosion during use, and can also accurately measure various plates and various machined parts. This instrument can be widely used in petroleum, chemical industry, metallurgy, shipbuilding, aviation, aerospace and other fields.
LUKE LK100 Ultrasonic Thickness GaugeSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0.8~ 300Mm (steel) |
| Display resolution | 0.1mm |
| Measurement mode | There are two Operating Modes of thickness measurement: single-point thickness measurement and scanning thickness measurement |
| Storage Capacity | Can store 20 sets (up to 100 Measured values each) of thickness measurement data |
| Speed of sound | 1000~9999m/s |
| Display | High contrast ratio segment LCD display, high luminance EL backlight |
| Power Supply | 2 AA alkaline batteries |
| Operating Time | More than 100h (when the backlight is not turned on) |
| Host size | 150*73.5*31mm |
| Weight | 185G (without battery) |
| error of indication | +/- (0.5% H + 0.1) mm, H is the actual thickness of the measured object |
| Measurement speed | Single point measurement 4 times per second, scanning mode 10 times per second |
| unit system | Metric or imperial system, metric and imperial systems can be freely converted |
LUKE LK100 Ultrasonic Thickness Gauge Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.