Search
    Cart(0)
      总价
      前往结算
      您的购物车是空的 : )
      Home> CO Detector> KORNO> KORNO GT-903-CO-Y (Infrared 3%) Carbon monoxide Detector

      KORNO GT-903-CO-Y (Infrared 3%) Carbon Monoxide Detector 0-5000PPM

      Kolno GT-903-CO-Y carbon monoxide Detector has passed CNEx16.0538 explosion-proof certification. It is an industrial CO gas alarm for carbon monoxide concentration detection. GT-903-CO-Y supports extended support for 1-4 Sensors, and the measurement concentration range is 0-5000PPM.

      VS
      Genuinegoods
      • KORNO GT-903-CO-Y (Infrared 3%) Carbon monoxide DetectorOverview

      • Specifications
      • Comments
      • FAQs
      GT-903-CO-Y (Infrared 3%)
      Carbon monoxide Detector

      Introduction

      GT-903 pump-suction carbon monoxide Detector is suitable for various mixed gas concentration detection in various industrial environments and special environments. It adopts imported electrochemical sensor/infrared absorption gas sensor and microcontroller technology, with fast response speed and high measurement accuracy. High, good stability and repeatability, the performance of the whole machine is at the domestic (CN) professional level, various parameters can be customized by the user, easy to operate, dust-proof design of the instrument, equipped with a dust filter, and can be used in various harsh occasions.

      Features


      KORNO GT-903-CO-Y (infrared 3%) carbon monoxide Detector 1

      KORNO GT-903-CO-Y (infrared 3%) carbon monoxide Detector 2

      KORNO GT-903-CO-Y (infrared 3%) carbon monoxide Detector 3

      VS

      KORNO GT-903-CO-Y (Infrared 3%) Carbon monoxide DetectorSpecifications

      LIST VALUE
      Detection gas Carbon Monoxide (CO), Imported Electrochemistry /NDIR Infrared Carbon Monoxide Gas Sensors
      Measuring range 0~5000ppm
      resolution 1ppm
      Response time ≤ 20 seconds (T90)
      linearity error ≤±1%
      Detection Accuracy ≤ ± 2% (depending on specific Sensors)
      Zero drift ≤±1%(F.S/年)
      recovery time ≤ 20 seconds
      Sexual repeability ≤±1%
      Gas expansion Supports 1-4 Sensors
      Explosion-proof certification CNEx16.0538
      Protection class IP65
      Production license Guangdong 00001052 (CMC metrology authentication)
      Temperature, humidity Optional accessories, temperature detection range: -40~120 ℃, humidity detection range: 0-100% RH
      Detection method Pump suction, built-in micro air pump
      Detection mode Real-time detection, Timer detection can be set
      storage mode Real-time storage and Timer storage can be set; 120,000 groups of data can be stored, and historical data can be viewed on the screen
      Operating Temperature -30 ~ 60℃
      Operating Humidity ≤ 95% RH, no condensation
      Operating Pressure -30Kpa ⃣ 100Kpa
      Power 4000mA Rechargeable Polymer Battery
      size 180*85*55 mm(L×W×H)
      Weight 0.5 Kg (net Weight)
      Execution standards GB3836.1-2010 "Explosive environments - Part 1: Equipment - General requirements", GB3836.4-2010 "Explosive environments - Part 4: Equipment protected by intrinsically safe" i "
      Optional range 0-5000、10000、50000ppm、20%、50%、100%Vol

      KORNO GT-903-CO-Y (Infrared 3%) Carbon monoxide Detector Packing list

      complete-built unit X1, USB charger X1, calibration cover X1, instrument case X1, manual X1, certificate X1, warranty card X1

      [Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

      FAQ

      [Q]
      Does the GT-903 Gas detector have a real-time Linear dispersion map?
      [A]
      Yes, real-time Linear dispersion is used to observe the trend of concentration changes of the detected gas Linear dispersion. When the cursor moves to this column, press the "OK" button to enter the real-time Linear dispersion. Then select the corresponding Sensors through the up and down buttons and press the OK button to view the Linear dispersion diagram. The Linear dispersion on the screen will display the current status.
      [Q]
      Can this gas detector export measurement data?
      [A]
      Yes, install the data export software, connect the data cable to the computer and the instrument, and then enter the historical data export interface.
      [Q]
      I want to do a test about the GB3836.4 standard, is this carbon monoxide detector okay?
      [A]
      Sure
      +KORNO GT-903-CO-Y (Infrared 3%) Carbon monoxide Detector Big data
        +KORNO GT-903-CO-Y (Infrared 3%) Carbon monoxide DetectorStandard
        +Navigation
        KORNO
        KORNO GT-903-CO-Y (Infrared 3%) Carbon Monoxide Detector 0-5000PPM
        Service
        Focus on online sales of Lab Testing Instruments