Elcometer 456 IPC dry Film Thickness Gauge

The Elcometer 456 Industrial Protective Coatings Thickness Gauge is pre-calibrated to measure dry film thickness on shot peened or blasted steel substrates.

Pre-calibrated with 4 profile ranges, the Elcometer 456 IPC is fast and very easy to use.

    Contour range

    User-selectable surface profiles include smooth, fine, medium, and rough ranges. The monolithic iron-based probe built into the instrument allows thickness measurements to be taken in mils or microns on flat or curved surfaces.  

    contour          Inch           metric system

    smooth      0-25μm       0-1mil

    filigree      25-60μm     1-2mils

    medium      60-100μm    2-3mils

    rough      >100μm       3-4mils

With a 70+ reading rate per minute, the instrument displays three independent thickness readings and averages them together. 

Coating thickness readings can be transferred to the ElcoMaster® via Bluetooth®, Bluetooth or USB, or your own application software can generate reports instantly.

Features

• Pre-calibrated with 4 profile ranges

• Shows 3 individual readings averaging in micron or mil

• The built-in integral probe gives stable, repeatable readings on flat or curved surfaces

• Easy-to-use menu structure in multiple Chinese: English, French, German, Dutch, Spanish, Chinese and Japanese

• USB or Bluetooth® data output to ElcoMaster® or your own application software

Product Structure

456 Industrial protection Coating thickness gauge x1, calibration shim x1, wrist cable x1, protective cover x1, screen protector x1, AA battery x2, USB cable x1, verification certificate x1, user manual x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.