UK Elcometer 101 A101A-01A Mechanical Coating Thickness Gauge for hot metallic coatings
The Elcometer 101 mechanical Coating Thickness Gauge is suitable for hot metal spray coatings with a thickness measurement range of 0 to 600 µm. The Elcometer 101 mechanical Coating Thickness Gauge has a reading hold function and is suitable for hazardous locations.
Elcometer
A101A-01A
-
KAIRDA F190 ° 90 ° Right Angle Probe Optional probe for NDT530 Coating Thickness Gauge
$ 467.00 -
Qnix Fe/NFe 1.2mm Dual Function Thickness Probe for magnetic Induction and eddy Current 1250μm
$ 1033.00 -
CHINA CTG-802-1500FN Split iron-aluminum dual-use Coating Thickness Gauge (standard)
$ 234.00 -
LEEB Leeb232 Coating Thickness Gauge magnetic Induction/eddy Current Range 0~1250μm
$ 410.00 -
Germany EPK MiniTest 735 FN1.5 dual-use Film Thickness Gauge thickness 0~1500μm/0~700μm
$ 2636.00
Introduction
The original non-destructive dry Film Thickness Gauge, the Elcometer 101, was the world's first portable coating Thickness Gauge, first manufactured in 1947.
Features
1. It has the function of reading holding
2. Accuracy ±10%
3. Suitable for dangerous places
4. Insensitive to cold and hot surfaces – suitable for hot metal jet coatings
Display diagram
Elcometer A101A-01A Coating Thickness GaugeSpecifications
| LIST | VALUE |
|---|---|
| Measurement principle | mechanical |
| Measurement range | 0~600µm |
| margin of error | +/- 10% of the reading/2.5μm (0.1mil), whichever is greater |
| Minimum measurement surface | Φ25mm |
| Calibrated Certificate | none |
| Display screen | Ruler scale |
| operation surface | 90 ° to the substrate |
| Minimum measurement surface | 38*15mm |
Elcometer A101A-01A Coating Thickness Gauge Packing list
Elcometer 101x1, calibration shim x1, suitcase x1, wristband x1, operation manual x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ELCOMETER 123 Surface Roughness Tester Operation Method
- Elcometer 456 A456CFNFBI1 Coating Thickness Gauge Beauty Appreciation
- Comparison of two concrete Coating Thickness Gauges
- Eletroplating Nickel Thickness Gauge Selection Case on Steel
- British elcometer Coating Thickness Gauge classification
- What is the accuracy of Elcometer Coating Thickness Gauge?
- One article takes you to know glossiness, reflectance and fog shadow
- Elcometer 506 Adhesion Tester Features
- Elcometer 456 Coating Thickness Gauge
- Elcometer 355 Coating Thickness Gauge Iron and non-iron based probe selection table
- ActiveGB/T 1727-2021
- ActiveHG/T 20720-2020
- ActiveISO 2808-2019
- ISO 2361-1982
- AbolishISO 2808-2007
- ActiveGB/T 1733-1993
- ActiveGB/T 13452.2-2008
- AbolishGB/T 11374-1989