German erichsen295 lacquered cross-cut knife to test the adhesion of paints Coatings
Erichsen
-
TRUIT TR 5006/2 adhesion cross-cut plate cross-cut number 11
$ 145.00 -
PUSHEN HGQ 1mm Single Blade Cross Hatch Cutter Standard 2 1mm Single Blade Cross-cut Testers
$ 179.00 -
Germany Erichsen 295/V Paint film adhesion Cross Hatch Cutter set 11 teeth/1mm
$ 1078.00 -
Shanghai PUSHEN 3mm * 6 Tooth Cross Hatch Cutter
$ 148.00 -
TQC SP3010 adhesion tape tack good not degumming mass performance stable
$ 155.00
The erichsen295 paint cross-hatch knife meets all cross-hatch test standards. It consists of a plastic handle and a cutter head mounted on it. The cutter head can be adjusted to the most comfortable position for the operator. Different types of cutter heads are available and a tape according to EN ISO 2409 is available.
The erichsen 295 cross-cutting instrument is supplied complete, including a cutter head mounted on a plastic handle. Comes in a sturdy plastic carrying case and also contains a nylon brush and a 2.5x magnifying glass. For the 295/III single-edged blade, a folding rule is also provided. The instrument also comes with manufacturer's certificate M.
standard | Film thickness | Tool number x spacing (mm) | model | Item number |
ISO 2409 | Up to 60μm | 6 x 1 3 | 295/I | 0019.01.31 |
6 x 1 4 | 295/II | 0019.02.31 | ||
6 x 2 | 295/II | 0019.02.31 | ||
6 x 3 | 295/III or 295/VII | 0019.03.31 | ||
ASTM D 3359 | Up to 50μm | 11x1 | 295/V | 0019.05.31 |
6x2 | 295/II | 0019.02.31 | ||
JIS K 5400 | Up to 60μm | 11x1 | 295/V | 0019.05.31 |
6x2 | 295/II | 0019.02.31 | ||
6x3 | 295/III or 295/VII | 0019.03.31 | ||
SNV 37111 | Up to 60μm | 8x1 | 295/III | 0019.03.31 |
8x2 | 295/III | 0019.03.31 | ||
VDA 621-411 | Up to 60 | 6x1 | 295/I | 0019.01.31 |
6x2 | 295/II | 0019.02.31 | ||
6x3 | 295/III | 0019.03.31 | ||
ECCA 2 ) | Up to 50 | 11x1 | 295/V | 0019.05.31 |
2x5 | 295/IV | 0019.04.31 | ||
ISO 2409-1972 | Agreement | 11x2 | 295/VI | 0019.06 |
1.After 1994, the European standard ENISO2409 replaced the national standards DIN53151, BS3900: E6, NFT30-38, NEN5337 and SIS184172.
2. After the cross-hatch test, you can also do a deep drawing test (ENISO1520). Deep drawing experiments can be completed with the following instruments:
ERICHSEN cupping Tester, model 200, 202, 202C or 204
Impact test device 304ECCA compliant with ASTM D3359
3. For soft substrates.
4. For hard substrates.
Erichsen erichsen295 Cross-cut knifeSpecifications
| LIST | VALUE |
|---|
Erichsen erichsen295 Cross-cut knife Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.