PhaseII SRG-2000 Portable Surface Roughness Tester

The PHASE II portable roughness Tester SRG-2000 is a pocket-sized, cost-effective instrument for measuring the surface roughness of workpieces and complies with the applicable standards. It can be used on different workpiece surfaces in the workshop, either horizontally or vertically. 

The roughness values to be measured can be displayed sequentially on the large LCD screen at the touch of a button: Ra, Rz, Rms(Rq), Rt, and the sampling length can also be selected. The calibration method also allows the instrument to be calibrated on a standard sample that is carried with it. A beep is heard every time the measurement interface is prepared. 

The easy-to-use SRG-2000 is capable of measuring roughness values on a wide range of surfaces: flat, cylindrical, cone, and grooved floors (grooves can be as long as they are 80x30 mm). It is suitable for quality inspection department, quality control department, processing workshop, assembly workshop and so on. 

The SRG-2000 Surface Roughness Tester has a wide measurement range for measuring roughness values: Ra, Rz, Rms(Rq), Rt. The piezoelectric sensor with diamond stylus ensures that the measured values are stable and reliable, and the surface roughness parameter Ra values in accordance with ASME B46.1 are also in accordance with ISO standards. The Rz value complies with the relevant DIN standards.

Host X1, standard calibrated sample X1, charger X1, operation manual X1, instrument case X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.