Elcometer 270 D270----3 Holiday Detector Voltage 9V/90V
Elcometer 270 Holiday Detector D270----3 does not have a calibrated certificate, the Voltage is 9V and 90V, Elcometer 270 Holiday Detector has visual alarm and audible alarm function.
Elcometer
D270----3
-
TQC SHEEN LD8503 high Voltage Holiday Detector 30kV
$ 6092.00 -
LEEB720 digital spark Detector high Voltage leak Detector
$ 562.00 -
Defelsko PosiTest LPD C Low Voltage Holiday Detector Advanced Configuration
$ 1398.00 -
KODIN DJ-6B Holiday Detector Metal anti-corrosion coating detector high voltage stepless adjustable
$ 568.00 -
KODIN 6DJ50 Holiday Detector anticorrosive coating Holiday Detector 35mm/50KV
$ 1003.00
Introduction
The Elcometer 270 Series utilizes wet sponge technology and is designed to achieve a new standard in wet sponge Testers â high quality, low Voltage, with accessories similar to those found in high Voltage spark Testers.
The instrument is delivered ready for use
Automatic sensitivity calibration and Voltage check
Low battery indication
Visual and audible alarms
Rod integration and splitting functions
Contains a variety of rod accessories, interchangeable
Three models â single, dual or triple Voltage
Easy to disassemble and wear-resistant cable
Large standard sponge
§ Test kits are available as accessories to meet all user needs
Standards compliant
The British Elcometer 270 pinhole Detector complies with standards AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384.
plan
Elcometer D270----3 Holiday DetectorSpecifications
| LIST | VALUE |
|---|---|
| detection Voltage | 9V/90V |
| Thickness range | 0~500µm |
| Sensitivity | 9V: 90kΩ ±5%；90V: 400kΩ ±5% |
| Operating Time | 9V: up to 200 hours; 90V: up to 80 hours |
| Power | 3 x AA (LR1600) 1.5V alkaline batteries; (NiMH rechargeable batteries can also be used, battery life will be reduced by up to 75%) |
| Set Accuracy | ±5% |
| Host size | 210 * 42 * 37Mm (without rod) |
| Weight | 610G (21oz) with rod body, wire and battery |
| Standard wire size | 175Mm (6.9 ") long (with sponge) |
| Flat sponge size | 约 150 x 60 x 25mm |
| meet the standard | AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384 |
| Calibrated Certificate | without |
Elcometer D270----3 Holiday Detector Packing list
Holiday Detector host x1, standard rod body and flat sponge x1 each, 4m (13 '2 ") loop wire with alligator clip x1, LR1600 (AA) battery x3, operation manual x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ELCOMETER 123 Surface Roughness Tester Operation Method
- Elcometer 456 A456CFNFBI1 Coating Thickness Gauge Beauty Appreciation
- Comparison of two concrete Coating Thickness Gauges
- Eletroplating Nickel Thickness Gauge Selection Case on Steel
- British elcometer Coating Thickness Gauge classification
- What is the accuracy of Elcometer Coating Thickness Gauge?
- One article takes you to know glossiness, reflectance and fog shadow
- Elcometer 506 Adhesion Tester Features
- Elcometer 456 Coating Thickness Gauge
- Elcometer 355 Coating Thickness Gauge Iron and non-iron based probe selection table