Elcometer 260 D260----2 Fluorescent (UV) pinholing inspection flashlight
Elcometer 260 fluorescent (ultraviolet) pinholing detection flashlight, model D260----2, using three watt purple Light Emitting Diode, for pinholing that can detect primer and topcoat, Elcometer 260 fluorescent (ultraviolet) pinholing detection flashlight is powered by 2x123A lithium battery.
Elcometer
D260----2
-
KODIN DJ-6A Holiday Detector high voltage coating detection, special for metal anti-corrosion
$ 661.00 -
TQC SHEEN LD8503 high Voltage Holiday Detector 30kV
$ 6092.00 -
Defelsko PosiTest LPD C Low Voltage Holiday Detector Advanced Configuration
$ 1398.00 -
LEEB720 digital spark Detector high Voltage leak Detector
$ 562.00 -
Kedian DJ-6-B Holiday Detector high Voltage type, detection Film thickness 0.05~ 10mm
$ 568.00
Introduction
The Elcometer 260 is battery powered and constructed of aluminum, providing a fast and low-cost method of detecting pinholes in coatings.
Elcometer 260 is equipped with a one-watt purple light-emitting tube. The flashlight wavelength is 405nm (±5nm), which is perceived as purple by the human eye.
Apply the UV-emitting additive to the base coating, shine a UV flashlight on the coating with purple light, and observe that the base coating is not covered by the subsequent fluorescent coating, which clearly indicates that this is the location of the pinhole.
Features
Low cost and easy to use
Using UV to shine violet light on the base coating can identify the location of any vacuum.
The sturdy structure
is made of aluminum alloy, and the O-ring is dust-proof and moisture-proof.Easy to carry and safe
battery charging, the click switch with a tail lock ring prevents accidental turning on during transportation or storage.
plan
Elcometer D260----2 Fluorescent (UV) pinholing detection flashlightSpecifications
| LIST | VALUE |
|---|---|
| Lens type | Binary Diffuse Lens |
| Voltage output | 3 watts |
| beam wavelength | 405nm ±5nm |
| Flashlight housing | Hard anodic oxidation aluminum |
| Power | 2X123A lithium battery |
| Operating Time | 6 hours (continuous use) |
| Host size | 150mm*35mm (5.9"*1.4") |
| Weight | 173g (6.1oz) |
| meet the standard | ASTM E 2501 |
Elcometer D260----2 Fluorescent (UV) pinholing detection flashlight Packing list
Elcometer 260 UV pinholing inspection flashlight x1, UV protective goggles x1, nylon belt holster x1, 123A lithium battery 2, operation manual x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ELCOMETER 123 Surface Roughness Tester Operation Method
- Elcometer 456 A456CFNFBI1 Coating Thickness Gauge Beauty Appreciation
- Comparison of two concrete Coating Thickness Gauges
- Eletroplating Nickel Thickness Gauge Selection Case on Steel
- British elcometer Coating Thickness Gauge classification
- What is the accuracy of Elcometer Coating Thickness Gauge?
- One article takes you to know glossiness, reflectance and fog shadow
- Elcometer 506 Adhesion Tester Features
- Elcometer 456 Coating Thickness Gauge
- Elcometer 355 Coating Thickness Gauge Iron and non-iron based probe selection table