UK Elcometer 2070 NPIRI fineness grindometer
Elcometer
Elcometer 2070 NPIRI
-
JINGKELIAN QXD (0-50um Stainless Steel) Fineness of Ground Gauge 0~50μm/5μm
$ 133.00 -
JINGKELIAN QXP 0-25μm ISO single-channe Fineness of Ground Gauge with Third Party Measurement Certificate
$ 220.00 -
TRUIT TR 1203/025 wire-channel Fineness gauge 0~25μm
$ 187.00 -
PUSHEN ADM-II Automatic scraper
$ 1314.00 -
TQC VF2122 wide-channel Grindometer 0~50μm with calibrated certificate
$ 1148.00
This high-precision instrument is used to determine the size and fineness of particles in printing inks according to the National Printing Ink Research Institute (NPIRI) scale.
Since the ink particles are too fine, the two grooves of the fineness plate have a gentle gradient allowing for a scale of 2.5 μm for better resolution.
The groove width is 25mm (0.98"), and the groove length is 165mm (6.5"). The NPIRI scale is displayed on the edge corresponding to the micron scale. The NPIRI fineness gauge plate and its scraper are made of hardened stainless steel.
| Part number | Model | range | scale | certificate | |||
| metric system | Inch | µm | mils | metric system | Inch | ||
| K0002070M001 | K0US2070M001 | Elcometer 2070 | 0 - 25 | 0 - 1 | 2.5µm / 1 NPIRI | 0.1mil / 1 NPIRI | ο |
| size | 220 x 80 x 12mm (8.6 x 3.1 x 0.5") | ||||||
| weight | 2.2kg (4.8lb) | ||||||
| Packing list | Elcometer 2070 NPIRI Fineness of Grind Gauge Plates, Scrapers, Plastic Sleeves and Operating Manual | ||||||
Elcometer Elcometer 2070 NPIRI fineness grindometerSpecifications
| LIST | VALUE |
|---|---|
| Scraper type | double-channel |
| Number of grooves | 2 |
| range | 0~25μm |
| Scale unit | μm、Mils |
| Scraper size | 220*80*12mm |
| Groove size | 25*165mm |
| Net Weight | 2.2kg |
Elcometer Elcometer 2070 NPIRI fineness grindometer Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ELCOMETER 123 Surface Roughness Tester Operation Method
- Elcometer 456 A456CFNFBI1 Coating Thickness Gauge Beauty Appreciation
- Comparison of two concrete Coating Thickness Gauges
- Eletroplating Nickel Thickness Gauge Selection Case on Steel
- British elcometer Coating Thickness Gauge classification
- What is the accuracy of Elcometer Coating Thickness Gauge?
- One article takes you to know glossiness, reflectance and fog shadow
- Elcometer 506 Adhesion Tester Features
- Elcometer 456 Coating Thickness Gauge
- Elcometer 355 Coating Thickness Gauge Iron and non-iron based probe selection table